Hup Hing manufactures stainless steel Side Table with Open Shelf units for compact preparation rooms, lab support corners, clean packing areas and commercial kitchen stations where operators need a washable surface plus visible storage below. The real buying question is not only table length; it is whether trays, tools, sample containers or small ingredients can be staged without creating a hidden dirt trap. A practical side table starts with the room footprint, shelf clearance, expected load, cleaning method and whether the table sits beside a sink, machine, wall or inspection bench.
A side table looks simple, but the shelf spacing decides whether it becomes a practical staging point or a place where items are forced in sideways. If the middle shelf is too low, operators cannot remove containers quickly; if the lower shelf is too close to the floor, cleaning underneath becomes harder.
The real Hup Hing product shows a brushed stainless rectangular table with a flat top, one open middle shelf, one lower open shelf, square tube posts and black adjustable feet. Those details suit areas that need visible storage and routine wipe-down without closed doors or drawer tracks.
| Detail to confirm | Practical specification range | Why it affects the room |
|---|---|---|
| Material grade | SUS304 for many prep, lab and kitchen support areas; SUS316 if chemical exposure is stronger | Matches corrosion resistance to water, detergent, humidity and cleaning liquid |
| Top and shelf panels | Folded stainless sheet, commonly discussed around 1.0mm to 1.5mm depending on span and load | Controls panel vibration, dent resistance and wiping comfort |
| Frame construction | Square tube legs with TIG-welded corners, deburred edges and adjustable feet | Keeps the table stable on uneven floors and reduces sharp contact points |
| Surface finish | Hairline brushed finish for daily wipe-down; smoother polish only where the site needs it | Balances hygiene, appearance and fingerprint control |
Measure the tallest item that must enter the shelf normally, not the smallest tray in the catalogue. In food preparation, that may be a GN pan, bottle crate or ingredient tub; in a lab or clean support room, it may be a parts box, sample container or stainless tray.
Clearance should also consider hand movement. Operators wearing gloves need space to lift the item without scraping the shelf lip, and cleaners need enough access to wipe the underside of the worktop and the rear corners.
A side table is specified well when the shelf opening, cleaning access and operator reach are drawn together.
Open shelves are easier to inspect than closed cabinets, but only if the welds, folded edges and foot details are kept clean. Continuous or well-finished TIG welds, deburred shelf corners and neat tube-to-panel joints reduce the small edges where residue normally collects.
For wet or food-adjacent rooms, adjustable feet help level the table without leaving a rocking frame. For stronger chemical wash routines, the stainless grade and underside finishing should be discussed before fabrication rather than after the table reaches the site.
An open shelf table fits tasks where operators need to see and retrieve items quickly: tray staging beside a sink, temporary storage near an inspection bench, container parking beside a packing table or clean utensil holding in a kitchen support area. It is less suitable when the site needs locked storage, dust protection or segregation of controlled items.
Useful references include the Side Table with Open Shelf product page, Hup Hing’s Our Products listing and the company background on About Us. Hup Hing is trusted since 1980 and offers custom stainless steel fabrication for cleanroom, lab, hospital, kitchen and industrial equipment from its Seremban base, while supporting buyers across Malaysia.
Check the wall clearance, machine door swing, sink splash direction, operator standing space and whether the shelves will hold dry items, wet trays or heavier containers. These site details decide whether the table needs a plain back, raised edge, stronger shelf support, different foot height or a specific surface finish.
For a focused discussion, send a room photo, desired outside size, shelf load, container height and cleaning routine to WhatsApp / Phone +6016-330 2905, or email [email protected]. Hup Hing can then review the table height, shelf spacing, material grade and fabrication finish before confirming a buildable stainless steel side table.
Yes. Shelf height can be adjusted after the tray, container or utensil size is confirmed.
It can be suitable when SUS304 or SUS316, folded edges, adjustable feet and cleaning access are matched to the water or detergent exposure.
Trusted since 1980, Kilang Kejenteraan Hup Hing Sdn Bhd offers custom stainless steel fabrication, cleanroom, lab, hospital, kitchen, and industrial equipment in Negeri Sembilan, Malaysia.
Posted by Kilang Kejenteraan Hup Hing Sdn Bhd on 8 Jul 26
Malaysia