6RI75E-060: 马来西亚的首选 Utsource Holding Company Limited

详情

Parameter	Description	Value
Part Number	Component Identifier	6RI75E-060
Type	Device Type	Relay
Coil Voltage	Voltage required to activate the relay	60V DC
Coil Power	Power consumption of the coil	1.2W
Contact Form	Configuration of the contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Insulation Voltage	Dielectric strength between contacts and coil	2500V AC for 1 min
Operating Temp	Temperature range for operation	-40°C to +85°C
Storage Temp	Temperature range for storage	-40°C to +85°C
Weight	Weight of the component	35g

Installation:
- Ensure that the relay is mounted on a flat surface.
- Secure the relay using the mounting holes provided.
Coil Connection:
- Connect the coil terminals to a power supply matching the specified coil voltage (60V DC).
- Verify polarity if applicable.
Contact Wiring:
- Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.
- Ensure wires are securely fastened to prevent loose connections.
Testing:
- Apply the rated voltage to the coil and verify that the contacts switch as expected.
- Check continuity between COM and NO when the coil is energized; between COM and NC when de-energized.
Maintenance:
- Periodically inspect the relay for signs of wear or damage.
- Clean the relay with a soft cloth; avoid using solvents that may damage the enclosure.
Handling Precautions:
- Handle the relay with care to avoid physical damage.
- Avoid exposing the relay to environments exceeding the operating temperature range.

(For reference only)