Product Description
The Festo CPV series electrical interface modules are dedicated communication components for CPV10, CPV14, and CPV18 valve terminals, providing direct fieldbus or AS-Interface connectivity between the valve island and higher-level control systems. Available in multiple variants including CPV...-GE-DI02 for CANopen/DeviceNet, CPV...-GE-DI01 for PROFIBUS/Festo fieldbus, and CPV...-GE-ASI for AS-Interface communication, these modules enable integrated I/O handling, device-specific diagnostics, and control of up to 16 solenoid coils as standard (expandable to 48 coils with CP string expansion).
Key Features & Advantages
Multiple Fieldbus and AS-Interface Protocols Supported: Available for PROFIBUS DP, CANopen, DeviceNet, Festo fieldbus, ABB CS31, SUCOnet K, and AS-Interface, ensuring seamless integration into virtually any control architecture.
Up to 48 Solenoid Coils Control: Supports control of up to 16 solenoid coils as standard, with expansion capability to 48 coils via CP string expansion, accommodating complex pneumatic systems.
Integrated I/O Capability: Select variants feature up to 16 inputs and 16 outputs (e.g., CPV10-GE-IB-8: 16 inputs, 8 outputs) for connecting sensors and actuators directly to the valve terminal.
Device-Specific Diagnostics: Provides diagnostics for valve terminal undervoltage, missing CP string modules, and output short circuits/overloads, enabling rapid fault detection and system troubleshooting.
Galvanic Isolation (Fieldbus Variants): Optocoupler-based galvanic isolation on the fieldbus interface protects the module from electrical interference and ground loops.
PELV Safety Compliance and Reverse Polarity Protection: Complies with Protective Extra-Low Voltage safety standards and includes reverse polarity protection on all electrical connections, safeguarding the module from incorrect wiring.
IP65 High Protection Class: Provides dust-tight protection and protection against water jets, making the module suitable for direct machine mounting in harsh industrial environments.
Moderate Corrosion Resistance CRC 2: Rated for moderate corrosion stress, ensuring reliable performance in humid industrial environments.
Robust Die-Cast Aluminium Housing: Manufactured from die-cast aluminium with PA-reinforced cover and CR/NBR seals, offering excellent mechanical strength and durability.
Wide Operating Temperature Range: Operates reliably from -5°C to 50°C ambient temperature, with storage temperature from -20°C to 70°C and relative humidity up to 95% non-condensing.
Reduced Installation Time and Wiring: Ready-to-use connection cables with plugs for fieldbus and load voltage simplify installation and reduce wiring time.
Clear LED Status Indication: Provides LED indicators for bus communication/configuration errors and for electronics/load supply and valve switching status, simplifying system commissioning and troubleshooting.
Switchable Address Setting: Addressing is set via an integrated switch module within a range of 1 to 125 (depending on protocol), enabling flexible node configuration.
Power-Failure Buffering: Features 10 ms power-failure buffering to maintain operation during brief voltage dips.
Comprehensive Pin Assignment Documentation: Detailed pin assignments for fieldbus connections (PROFIBUS, CANopen, etc.) available in Festo manuals for easy system integration.
Suitable for Potentially Explosive Atmospheres (DI01 variant): The CPV...-DI01 variant carries II 3 G/D Ex nA II T5 X (ATEX) certification for Zone 2 gas and Zone 22 dust hazardous areas.
CE, c UL us, and RoHS Certified: Meets international safety, electromagnetic compatibility, and environmental standards.
Technical Specifications
Brand: Festo
Model Series: CPV (CPV10, CPV14, CPV18)
Product Numbers: 546190 (CPV14-GE-DI02-8), 552561 (AS-Interface variant), CPV10-GE-IB-8, CPV18-GE-DI01-8, CPV14-GE-ASI-8-VI (RS stock)
Product Type: Electrical Interface Module / Fieldbus Slave / AS-Interface Slave
Suitable Valve Sizes: 10 mm, 14 mm, 18 mm
Number of Valve Positions Supported: 4, 6, or 8 (dependent on variant)
Number of Solenoid Coils Supported: Up to 16 (standard), up to 48 (with CP string expansion)
Communication Protocols:
DI01 Variant: PROFIBUS DP, Festo fieldbus, ABB CS31, SUCOnet K
DI02 Variant: CANopen, DeviceNet
ASI Variant: AS-Interface
IB Variant: Interbus (likely)
Number of Inputs (IB variant): 16
Number of Outputs (IB variant): 8 (controls 8 or 16 valves)
Fieldbus Connection Options: M12x1 5-pin B-coded, 9-pin Sub-D, flat cable AS-Interface plug
Load Voltage Supply: 24 V DC (20.4 to 26.4 V)
Electronics Supply: 24 V DC (20.4 to 26.4 V, max. 100 mA)
Load Voltage Current Consumption: Dependent on number and type of switched solenoid valves
Residual Ripple: 4 Vpp (within tolerance)
Power-Failure Buffering: 10 ms
Degree of Protection: IP65 (EN 60529) with plugs inserted or capped
Corrosion Resistance Class (CRC): 2 – Moderate corrosion stress
Ambient Temperature (Operation): -5°C to 50°C
Ambient Temperature (Storage): -20°C to 70°C (CPV...-DI01) / -20°C to 50°C (CPVSC1-AE16-CPI variant)
Relative Air Humidity: 95%, non-condensing
Protection Against Electric Shock: PELV circuits (IEC/DIN EN 60204-1)
Galvanic Isolation (Fieldbus Interface): Optocoupler-decoupled
Reverse Polarity Protection: Yes (for all electrical operating voltage connections)
ATEX Certification: II 3 G/D EEx nA II T5 X (CPV...-DI01 variant only)
EMC Immunity: DIN EN 61000-6-2 (industry)
EMC Emissions: DIN EN 61000-6-4 (industry)
Mounting: Screwed tight with provided fittings
Housing Material: Die-cast aluminium, PA-reinforced cover
Seals Material: CR/NBR
Certifications: CE, c UL us - Recognized (OL), RoHS (all variants)
Country of Origin: Germany (primary)
Ideal For
CPV10, CPV14, and CPV18 valve terminal electrical connectivity and fieldbus integration, direct connection to PROFIBUS DP, CANopen, DeviceNet, Festo fieldbus, AS-Interface, or Interbus networks, industrial automation systems requiring IP65 protection for harsh environments, paint shop and food industry applications requiring LABS conformity (dependent on variant), distributed valve terminal control via fieldbus or AS-Interface, applications needing integrated digital I/O at the valve terminal (IB variant), and hazardous area applications requiring ATEX Zone 2/22 certification (DI01 variant).
Why Choose Festo CPV Series Electrical Interface Module
Choose the Festo CPV series electrical interface module for its role as the dedicated communication gateway for CPV valve terminals, supporting a wide range of fieldbus protocols (PROFIBUS DP, CANopen, DeviceNet, Festo fieldbus, ABB CS31, SUCOnet K) and AS-Interface, ensuring seamless integration into virtually any control architecture. Featuring up to 16 solenoid coils control as standard (expandable to 48 coils with CP string expansion), integrated I/O handling capabilities (16 inputs/8 outputs), device-specific diagnostics for undervoltage, missing modules, and short circuits/overloads, optocoupler-based galvanic isolation on the fieldbus interface for electrical protection, PELV safety compliance and reverse polarity protection for all electrical connections, IP65 degree of protection for dust-tight and water jet resistance, moderate CRC 2 corrosion resistance for humid environments, robust die-cast aluminium housing with PA-reinforced cover and CR/NBR seals, wide -5°C to 50°C operating temperature range and 95% humidity tolerance, clear LED status indication for diagnostics, power-failure buffering (10 ms), ATEX Zone 2/22 certification available on DI01 variants for hazardous areas, CE, c UL us, and RoHS certifications, and German engineering quality. Backed by comprehensive Festo manuals with detailed pin assignments and installation instructions, this electrical interface series delivers reliable, flexible, and robust valve terminal connectivity for demanding industrial automation applications.
Tags
#Festo #CPV #ElectricalInterface #ValveTerminal #CPV10 #CPV14 #CPV18 #PROFIBUS #CANopen #DeviceNet #ASInterface #Fieldbus #IP65 #CRC2 #PELV #ATEX #IOModules #IndustrialAutomation #PneumaticControl #cULus #RoHS #MalaysiaSupplier
Xem thêm chi tiết về GREX IND SUPPLY
Malaysia
