Product Description
The Festo CPVSC1-AE16-CPI is an electrical interface module designed for CPV-SC valve terminals, enabling CPI fieldbus communication with a CPI master to control up to 16 solenoid coils . This electrical interface connects to the left end of the CPV-SC valve manifold using M9, 5-pin plugs and sockets and receives configuration parameters via the CP protocol . With IP20 protection, low corrosion resistance (CRC 1), and VDMA24364-B2-L LABS conformity, the CPVSC1-AE16-CPI is well-suited for protected industrial environments including control cabinets and paint shop applications.
Key Features & Advantages
CPI Fieldbus Communication: Communicates with a CPI master via the CP fieldbus protocol, supporting parameterisation and diagnostics for up to 16 solenoid coils on the CPV-SC valve terminal
Undervoltage Diagnostics: Features device specific diagnostics that monitor for valve terminal undervoltage, enabling rapid fault detection and system troubleshooting
Diagnostic LEDs: Integrated status LEDs provide clear visual indication of CP fieldbus communication and valve switching status, simplifying system commissioning and maintenance
Wide Operating Temperature Range: Operates reliably from -5°C to 50°C, with storage temperature from -20°C to 50°C and relative humidity up to 90% at 50°C (non condensing)
Low Corrosion Resistance Class CRC 1: Rated for low corrosion stress according to FN 940070, making it suitable for controlled industrial environments
LABS (PWIS) Conformity VDMA24364-B2-L: Complies with paint wetting impairment substances standards, suitable for paint shop environments and applications sensitive to paint defects
M9, 5-pin Fieldbus Connection: Features both plug and socket connectors for the CPI fieldbus interface, enabling daisy chaining of multiple valve terminals on the same communication network
Through Hole Mounting for Secure Installation: Mounts securely to the CPV-SC valve manifold using through hole mounting, ensuring mechanical stability and reliable electrical contact
Reverse Polarity Protection: Provides reverse polarity protection for all electrical operating voltage connections, safeguarding the module from incorrect wiring
CE, c UL us, and RoHS Certified: Meets EU EMC Directive, carries c UL us Recognized (OL) certification for North American markets, and complies with RoHS environmental standards
Parameterisation via CP Protocol: Allows configuration of valve terminal parameters through the CP fieldbus protocol, simplifying system setup and integration
PA Reinforced Housing with 150 g Weight: Lightweight yet durable polyamide reinforced housing weighing only 150 g, adding minimal mass to the valve terminal assembly
IP20 Protection Class: Provides protection against solid foreign objects ≥1 mm, suitable for protected indoor environments such as control cabinets and cleanrooms
PELV Safety Compliance: Complies with Protective Extra Low Voltage safety standards for protection against direct and indirect contact
Compatibility with CPV-SC Series: Specifically designed for CPV-SC valve terminals with 10 mm fixed grid architecture, supporting 4, 8, 12, or 16 valve position configurations
Product Lifecycle Note – Phasing Out: Festo issued an obsolescence reminder in August 2024 recommending that this product not be used for new designs. Alternative products are available. Last production planned for 09/2027, last availability 12/2031
Technical Specifications
Brand: Festo
Model: CPVSC1-AE16-CPI
Product No.: 541975
Product Type: Electrical Interface / CPI Fieldbus Module
Series: CPV-SC
Communication Protocol: CP fieldbus
Fieldbus Interface: M9, 5-pin, plug and socket
Max. Number of Solenoid Coils: 16
Width: 52 mm
Height: 40 mm
Length: 70 mm
Product Weight: 150 g
Nominal Operating Voltage: 24 V DC
Current Consumption (Electronics): ≤ 100 mA
Current Consumption (Load): Depends on pneumatic valve type and number of valves
Power Failure Bridging: Logic side only
Degree of Protection: IP20 (IEC 60529)
Corrosion Resistance Class (CRC): 1 – Low corrosion stress
LABS (PWIS) Conformity: VDMA24364-B2-L
Ambient Temperature: -5°C to 50°C
Storage Temperature: -20°C to 50°C
Relative Air Humidity: 90% at 50°C (non condensing)
Type of Mounting: Through-hole
Housing Material: PA reinforced (Polyamide)
Reverse Polarity Protection: Yes (for all electrical operating voltage connections)
Parameterisation: Via CP protocol
Device specific Diagnostics: Valve terminal undervoltage
LED Display: CP fieldbus status LEDs
Protection Against Electric Shock: PELV
Certifications: CE (EU EMC Directive), c UL us - Recognized (OL), RoHS
Material Note: RoHS compliant
Country of Origin: Germany (DE)
Ideal For
CPV-SC valve terminal electrical interface and CPI fieldbus connectivity, control cabinet installations requiring IP20 protection, paint shop environments requiring LABS conformity (VDMA24364-B2-L), industrial automation systems with up to 16 solenoid coils per valve terminal, CPI master network integration, distributed valve terminal control via CP fieldbus protocol, and applications where a compact 52 mm wide fieldbus interface is required.
Why Choose Festo CPVSC1-AE16-CPI Electrical Interface
Choose the Festo CPVSC1-AE16-CPI for its role as the CPI fieldbus interface for CPV-SC valve terminals, supporting up to 16 solenoid coils with M9, 5-pin plug and socket connectors for daisy chaining multiple terminals . Featuring device specific undervoltage diagnostics for rapid fault detection , LED status indicators for CP communication and valve switching , CP protocol parameterisation for simplified system setup , wide -5°C to 50°C temperature range , 90% relative humidity tolerance, IP20 protection for control cabinet environments, low CRC 1 corrosion resistance for protected industrial applications , LABS conformity VDMA24364-B2-L for paint shop environments , reverse polarity protection for all electrical connections , through hole mounting for secure installation , PA reinforced housing weighing only 150 g , CE, c UL us, and RoHS certifications , and German engineering quality. Please note that this product entered the phasing out process in August 2024 and is not recommended for new designs – alternative products are available .
Tags
#Festo #CPVSC1AE16CPI #541975 #ElectricalInterface #CPIFieldbus #CPVSC #ValveTerminal #FieldbusInterface #CPProtocol #IP20 #CRC1 #LABSConformant #RoHS #CE #cULus #ControlCabinet #PaintShop #IndustrialAutomation #PneumaticControl #MalaysiaSupplier
Xem thêm chi tiết về GREX IND SUPPLY
Malaysia
