EXPLOSION PROOF LED Light Tube - KEX

Looking for this product? Contact us at [email protected]

Fast delivery and good price!


*THE PHOTO SHOWN ABOVE IS FOR ILLUSTRATION PURPOSE ONLY (MIGHT NOT BE THE SAME AS THE PART NUMBER LISTED BELOW)
*ALWAYS REFER TO US IF YOU NEED FURTHER ASSISTANCE

The KEX explosion-proof lighting range includes LED tube fixtures, non-ignition luminaires, strip lights, portable LEDs, and floodlights. The available sizes vary by product type: tube fixtures are offered in 2 ft and 4 ft lengths, strip lights in slim modular lengths, portable LEDs in compact handheld sizes, and floodlights in wattage-based sizes (30W, 50W, 100W).

Sizes Available by Product Type

1. LED Tube Fixture

• Lengths: 2 ft (600 mm) and 4 ft (1200 mm).
• Applications: General indoor hazardous area lighting (factories, plants).

2. Non-Ignition Light Fixture (Explosion-Proof Luminaire)

• Sizes: Typically 2 ft and 4 ft housings, depending on installation.
• Applications: Zone 1 & 2 gas environments requiring non-sparking safety.

3. Ex Strip Lighting

• Lengths: Slim modular strips (commonly 600 mm, 1200 mm).
• Applications: Corridors, tunnels, confined spaces.

4. Portable Explosion-Proof LED

• Sizes: Compact handheld or small floodlight-style units.
• Applications: Maintenance, temporary work, mobile lighting.

5. Explosion-Proof LED Floodlight

• Wattage Options: 30W, 50W, 100W (sometimes higher).
• Applications: Outdoor hazardous zones, wide-area illumination.

Comparison Table

 Key Considerations

• Tube/strip fixtures are chosen by length (2 ft or 4 ft).
• Floodlights are selected by wattage output (30W–100W).
• Portable LEDs are compact, designed for mobility rather than fixed installation.
• All products are ATEX/IECEx certified and suitable for Zones 1, 2, 21, 22.