The Elcometer 6910/3 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples.
This closed cup tester has been designed to carry out flash/no flash tests rapidly and efficiently to determine the flash point of liquids and semi-solids in the 10°C to 130°C (50°F to 266°F) temperature range. A sample cup is heated and then cooled by Peltier cells. This gives very accurate and stable sub-ambient test temperatures and the benefit of rapid temperature normalisation between tests.
Flash point is automatically detected using a thermally activated detector, reducing the risk of operator error and minimising the potential danger of inhaling fumes during a test. A rechargeable gas tank with on/off switch and fine adjustment are integral to the unit.
| Part Number | Description | Certificate |
| K6910M013 | Elcometer 6910/3 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester |  |
| Temperature Range | 10°C to 135°C (50°F to 275°F) | |
| Test Modes | Rapid Equilibrium and Ramp | |
| Sample Size | 2ml (0.067fl oz) for flash points up to 100°C (212°F) 4ml (0.135fl oz) for flash points above 100°C (212°F) |
|
| Test Duration | 1 minute below 100°C, 2 minutes above 100°C, or user determined 1 to 99 minutes | |
| Ramp Rate | 2°C/min ramp (3.6°F/min ramp) | |
| Cup Material | Corrosion resistant steel insert | |
| Dimensions | 195 x 295 x 140mm (7.6 x 11.6 x 5.5”) | |
| Weight | 3kg (6.6lb) | |
| Packing List | Elcometer 6910 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester, 2ml (0.067fl oz) syringe, gas valve & cap, power supply, mains power cable, 2mm Allen Key, quality assurance certificate, warranty registration form and operating instructions | |
