| Supply voltage | ||
| Reverse voltage protection | Yes | |
| Load voltage L+ | ||
| ● Rated value (DC) | 24 V | |
| ● Reverse polarity protection | Yes | |
| Input current | ||
| from load voltage L+ (without load), max. | 5 mA; Per channel | |
| from backplane bus 3.3 V DC, max. | 10 mA | |
| Power loss | ||
| Power loss, typ. | 1.5 W | |
| Address area | ||
| Address space per module | ||
| ● Address space per module, max. | 1 byte | |
| Digital outputs | ||
| Type of digital output | Source output (PNP, current-sourcing) | |
| Number of digital outputs | 8 | |
| Short-circuit protection | Yes | |
| ● Response threshold, typ. | 1.5 A | |
| Limitation of inductive shutdown voltage to | Typ. L+ (-55 to -60 V) | |
| Controlling a digital input | Yes | |
| Switching capacity of the outputs | ||
| ● on lamp load, max. | 5 W | |
| Load resistance range | ||
| ● lower limit | 48 !& | |
| ● upper limit | 3 400 !& | |
| Output voltage | ||
| ● for signal "1", min. | L+ (-1.0 V) | |
| Output current | ||
| ● for signal "1" rated value | 0.5 A | |
| ● for signal "1" permissible range, min. | 7 mA | |
| ● for signal "1" permissible range, max. | 600 mA | |
| ● for signal "0" residual current, max. | 0.3 mA | |
| Output delay with resistive load | ||
| ● "0" to "1", max. | 300 µs | |
| ● "1" to "0", max. | 600 µs | |
| Parallel switching of two outputs | ||
| ● for uprating | No | |
| ● for redundant control of a load | Yes | |
| Switching frequency | ||
| ● with resistive load, max. | 100 Hz | |
| ● with inductive load, max. | 2 Hz | |
| ● on lamp load, max. | 10 Hz | |
| Total current of the outputs | ||
| ● Current per module, max. | 4 A | |
| Cable length | ||
| ● shielded, max. | 1 000 m | |
| ● unshielded, max. | 600 m | |
| Interrupts/diagnostics/status information | ||
| Diagnostics function | No | |
| Diagnostics indication LED | ||
| ● Status indicator digital output (green) | Yes | |
| Parameter | ||
| Remark | 3-byte parameter (not accessible for the user) | |
| Potential separation | ||
| Potential separation digital outputs | ||
| ● between the channels | No | |
| ● between the channels and backplane bus | Yes | |
| Isolation | ||
| Isolation tested with | 500 V DC | |
| Dimensions | ||
| Width | 15 mm | |
| Height | 81 mm | |
| Depth | 52 mm | |
| Weights | ||
| Weight, approx. | 40 g | |
