Reinforced concrete piles are structural elements made from concrete and steel reinforcement used to support foundations by transferring loads to deeper, more stable soil layers. These piles are commonly used in civil engineering projects where surface soils are too weak to support structures.
| Feature | Reinforced Concrete (RC) Piles | Prestressed Concrete (PC) Piles |
|---|---|---|
| Definition | Concrete piles with standard steel reinforcement (rebars) | Concrete piles with prestressed steel tendons |
| Type of Reinforcement | Mild steel rebars (passive) | High-tensile steel strands/wires (actively tensioned before casting) |
| Pre-tension or Post-tension | No prestressing involved | Prestressing applied (usually pre-tensioned) |
| Crack Resistance | Moderate – may crack under high tension | High – designed to resist tensile stresses and cracking |
| Load Capacity | Lower load capacity per unit | Higher load capacity (for same cross-section) |
| Durability | More prone to cracking and corrosion if not protected | Better resistance to corrosion due to tight, crack-free concrete |
| Length & Slenderness | Generally shorter or thicker | Can be made longer and more slender |
| Fabrication Method | Simple casting with rebars | Requires tensioning equipment and more precise control |
| Cost | Generally cheaper to produce | More expensive due to prestressing steel and process |
| Usage | Small to medium structures, buildings, short-span bridges | Large buildings, high-rise foundations, marine structures, long-span bridges |
| Common Shape | Square or circular cross-sections | Mostly spun (circular) or square precast piles |
High load-bearing capacity.
Good resistance to corrosion (especially when properly designed).
Can be used for a wide range of soil types and water tables.
Long service life with minimal maintenance.
