| ITEMS | UNIT | JN-FV900 | ||
| TABLE | Size | mm | 1,000 x 500 | |
| T Slot (width x no x distance) | mm x T | 18 x 5 x 100 | ||
| Maximum Table Load | kgs | 700 | ||
| TRAVEL | X, Y, Z Axis | mm | 900 x 500 x 500 | |
| Table Top Surface To Spindle Nose | mm | 150-650 | ||
| Distance Between Spindle Center & Column Surface | mm | 517 | ||
| Roller Type Linear Guideway (X / Y / Z Axis) | mm | 45 / 45 / 45 | ||
| Ball Screw (X / Y / Z Axis) | mm | 40 x 40 x 40 | ||
| SPINDLE | Spindle Holder | Direct | ||
| Taper | ISO | BT40 | ||
| Spindle Speed | rpm | 12,000 Direct Spindle | ||
| FEED | Cutting Feed Rate X Y Z | m/min | 1~10,000 | |
| Rapid Feed Rate X Y Z | m/min | 36 / 36 / 36 | ||
| ATC | Type | ARM | ||
| Max. Tool Dia | mm | 78 / 150 | ||
| Max. Tool Length | mm | 250 | ||
| Max. Tool Weight | kgs | 7 | ||
| Tool Type | BT40 | |||
| Tool Magazine Capacity | pcs | 24 | ||
| MOTORS | Spindle (Cont./30 min) | kW | 11 / 15 | |
| X / Y / Z Axis | kW | 3.0 / 3.0 / 3.0 (Fanuc) | ||
| OTHER | Machine Space (L x W x H) | mm | 3,468 x 2,282 x 2,618 | |
| Net Weight | kgs | 6.,000 | ||
| TYPES | ACCESSORIES | |||
| STANDARD | Spindle Motor FANUC Japan | Air Tank | ||
| X/Y/Z Axis FANUC Japan | Pneumatic Components | |||
| Ballscrew (X/Y/Z Axis) PMI/HIWIN Taiwan | Transformer | |||
| Linear Guideway (X/Y/Z Axis) PMI/HIWIN Taiwan | Electrical Components | |||
| Ballscrew Coupling JANETECH Taiwan | Telescopic Cover | |||
| Bearing NACHI Japan | Rear Flush | |||
| Electric Lubrication System | Machine Peripheral Sheet Metal | |||
| Cutting Cylinder | Heat Exchanger | |||
| Spindle | Spindle Oil Cooler | |||
| Tool Magazine | Screw Type Chip Conveyor | |||
| Cooling Pump | AICC II Function | |||
| Coolant Gun & Air Gun | Oil Skimmer | |||
