PENTENS T-100 is a high-performance, single-component, water-based polyurethane bitumen emulsion formulated for flexible and durable waterproofing applications. Designed for easy and environmentally friendly use, T-100 cures into a tough, seamless, and elastic membrane that adheres excellently to concrete, masonry, and metal surfaces.
This product combines the durability of bitumen with the flexibility of polyurethane, offering superior waterproofing protection for both above-ground and below-ground structures.
Water-Based & Eco-Friendly
Low odor, solvent-free, and safe for indoor applications.
Excellent Waterproofing
Forms a continuous, joint-free membrane that resists water penetration.
Highly Flexible & Crack-Bridging
Maintains elasticity under thermal and structural movement.
Strong Adhesion
Bonds well to concrete, metal, wood, and cement boards.
UV-Resistant (with topcoat)
Can be overcoated for UV and weather protection in exposed areas.
Easy Application
Can be applied by brush, roller, or spray.
| Property | Value |
|---|---|
| Appearance | Black viscous liquid |
| Base Material | Water-based polyurethane bitumen |
| Solid Content | ≥ 55% |
| Drying Time (Touch Dry) | 2–4 hours |
| Full Cure | 24–48 hours |
| Elongation at Break | ≥ 300% |
| Application Temperature | 5°C to 40°C |
| Coverage Rate | 1.5–2.0 kg/m² for 1.5 mm DFT |
| Packaging | 20 kg pail |
| Shelf Life | 12 months in original container |
Foundation walls and basements
Retaining walls
Planter boxes
Wet areas (bathrooms, kitchens)
Podium decks and balconies
Flat and sloped roofs (with UV topcoat)
Floor slabs and footings
Surface Preparation: Clean, dry, and free of dust/oil.
Priming (if needed): Use diluted T-100 or compatible primer on porous surfaces.
Application: Apply in 2–3 coats using brush, roller, or airless spray.
Curing: Allow each coat to dry before applying the next.
Protection: Use protective screed or topcoat if exposed to UV or traffic.
