AD845JN

BUY AD845JN https://www.utsource.net/itm/p/18993.html
Precision, 16 MHz CBFET Op Amp

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Connect the power supply to the V_CC pin and ground to the GND pin.

2. Input Signals:

   • The input voltage (V_I) should be within the range of 0V to (V_CC - 1.5V).
   • Connect the input signal to the IN+ and IN- pins as required.

3. Output Signals:

   • The output voltage (V_O) will be within the range of 0V to (V_CC - 1.5V).
   • Connect the load or next stage circuit to the OUT pin.

4. Operational Considerations:

   • The AD845JN has a bandwidth of 10 MHz and a slew rate of 13 V/μs, making it suitable for high-speed applications.
   • The large signal voltage gain is 1000 V/V at 1 kHz, ensuring good amplification performance.
   • The input bias current is typically 10 nA, which is low enough to minimize loading effects on the input source.
   • The input offset voltage is ±1 mV, which helps in maintaining accuracy in the output signal.

5. Power Consumption:

   • The typical power consumption is 15 mW at 5V supply, which is relatively low for high-speed operational amplifiers.

6. Stability and Compensation:

   • The AD845JN is internally compensated for stability, but external compensation may be required for specific applications to ensure stable operation.

7. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool place away from direct sunlight and extreme temperatures.