Torque monitor for UTM/UTMV
* Torque monitor specialized for UTM/UTMV
* Torque, rotation speed and power are displayed simultaneously
* Hold function
Sample, Peak, Valley, P-P, Average
* Upper/lower comparators function
ALM HI, HI, OK, LO, ALM LO
* Data storage function
* Easy connection to UTM/UTMV with one cable
* The unit supplies electric power to UTM/UTMV.
* Variation of torque, rpm, and power can be monitored and saved on PC. (with USB interface option only)
Sensor input for torqueDrive power supply for UTM/UTMVPulse input for rotation speedDisplay sectionSetting sectionExternal input/output sectionGeneral performanceAttachment
| Sensor input for torque (voltage input) | |
| Input resistance | 1MΩ |
|---|---|
| Signal input range | ±5V |
| Accuracy |
Non-linearity:Within 0.02%/FS±1digit Zero drift:Within 0.2mV/ RTI Gain drift:Within 0.01%/ |
| A/D converter |
･ Speed…300 times/sec. ･ Resolution…24bit(binary)Approx. 1/30000 with respect to 5V |
| Analog filter | Low-pass filter-6dB/oct Selectable from 3, 30, 300, and 1kHz. |
| Voltage output | Input voltage cuff (For test point) |
| Drive power supply for UTM/UTMV | |
| Power supply voltag | DC24V*One UTM/UTMV at the maximum |
|---|---|
| Pulse input for rotation speed (open collector input) | |
| Maximum input frequency | In accordance with the output frequency of the UTM/UTMV series |
|---|---|
| Minimum input frequency |
Select from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr) 60, 40, 20, 12, 8 rpm (when pulse rate is 1 ppr) |
| Minimum detection pulse width | 50μs |
| Circuit configuration |
No-voltage contact input (minus common) Open collector connectableIcApprox. 10mA |
| Display section | |
| Display |
Main displayCharacter height 15mmNumerical display by 7-segment green LED5-digit+sign Sub display Character height 8mmNumerical display by 7-segment green LED5-digit |
|---|---|
| Indicated value |
Main display5-digit9999999999Signs: Minus sign on most significant digit Sub display 5-digit1999999999Signs: Minus sign on most significant digit |
| Decimal point | 0, 0.0, 0.00, 0.000Only a torque and a power. Rotation speed is nothing |
| Display frequency | Selectable from 3, 6, 13, and 25 times/sec. |
| Status display | HILOHOLD |
| Setting section | |
|
Setting item |
HI/LO limit HI limit LO limitAlarm HI limitAlarm LO limit Comparison/hold Comparison function selectNear zeroHysteresisHold function selectDetection timeAverage sample numberHold start level Operation 1 Motion detect (time)Motion detect (range)Zero tracking (time)Zero tracking (range)SI/F function selectDisplay frequencyDisplay ON/OFF Operation 2 Digital filter (torque)Analog filter (torque)Dead bandDigital filter (rotation speed) Calibration Calibration function select 1(torque)Zero calibrationEquivalent input calibrationActual load calibrationDigital offsetDigital Zero limitCalibration function select 2 (rotation speed/ power) Protect/Initializ Setting protectKey protectInitializePasswordRecord data clear |
|---|---|
| Hold |
Sample, Peak, Valley, P-P, Average Hold section setting (All section・External signal・External signal + Time・Level + Time) |
| External input/output section | |
|
External input 4 |
Hold controlHold resetDigital ZeroRecord data clear Dry contact input circuit (minus common type), Ic10mA or less |
|---|---|
|
External output 7 |
HI/LO limit comparisonalarm HI・HI・OK・LO・alarm LO Hold completeRUN Open collector output circuit (sink type), Vceo30VmaxIc30mAmax |
| Interface |
*Only one option can be installed. |
| General performance | |
| Power supply voltage | AC100V240V(+10%-15%)(free power source) 50/60Hz |
|---|---|
| Power consumption | 14W max |
| Operating conditions |
Operation:-10+40桡Storage-40+80 Humidity:85%RH or less(non-condensing) |
| Dimension | 96(W)×96(H)×138(D) mm(Projections excluded) |
| Panel cutout size | 92×92(+1-0)mm |
| Weight | Approx. 1.0kg |
| Attachment | |
|
External input/output connector×1 AC input cord 3mwith solderless terminal*×1 Cable for UTM/UTMV connection 2m×1 Unit seal×1 Connector for BCD outputwith BCD output option×1 Operating toolwith D/A converter(3ch) option×1 Mini screwdriverwith D/A converter option×1 Operation manual×1 *The attached AC input cord is intended for 100V AC power in Japan. |
|
| Model | Description |
| BCO | BCD parallel data output interface |
|---|---|
| 232 | RS-232C communication interface |
| D3V | D/A converter voltage output(3ch) |
| DAV | D/A converter voltage output |
| DAI | D/A converter current output |
| USB | USB interface |
| Model | Description |
| CA372-I/O | Cable with FCN connector at one-end 3m |
|---|---|
| CAAC2P-B3 | AC Supply cord 3m |
| CAAC3P-CEE7/7-B2 | AC Supply cord (Voltage resistance:250V)2m |
| CN34 | D-Sub9p connector for RS-232C |
| CN50 | FCN series I/O connector (with cover) |
| CN51 | BCD output connector |
| CN55 | FCN series I/O connector (with diagonal cover) |
| CN73 | D/A converter(3ch) connector |
| CN90 | Waterproof plastic connector for UTM/UTMV connection |
| DTC2-PSL | Case for TM301 |
