Torque input｜Input for high-speed rotation｜Input for low-speed rotation｜Display section｜External I/O signal｜Interface｜General specifications｜Attachments
| Torque input (voltage input) | |
| Signal input range | -5 to +5V Input impedance：1MΩ or more |
|---|---|
| Accuracy |
Non-linearity：within 0.02%FS±1digit Zero drift： within 0.2mV/℃ RTI Gain drift ： within 0.01%/℃ |
| Analog filter |
Low pass filter (-6dB/oct.) Select from 10, 30, 100, 300, 1k, 3k, 10k, 30kHz |
| A/D converter |
･ Rate ：20000times/sec ･ Resolution：24bit (binary) Approx. 1/30000 against 5V |
| Monitor output | Output level ：input voltage cuff (for test point) |
|
Input for high-speed rotation (open-collector pulse) : for standard UTMII/UTMV. |
|
| Maximum input frequency | In accordance with the output frequency of the UTMⅡ/UTMV series |
|---|---|
| Minimum input frequency |
Select from 15, 10, 5, 3 or 2 rpm (when pulse rate is 4 ppr) Select from 60, 40, 20, 12 or 8 rpm (when pulse rate is 1 ppr) |
| Minimum detection pulse width | 50μs |
| Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (Ic＝Approx. 10mA) |
|
Input for low-speed rotation (open-collector pulse) : for UTMII with rotary encoder option |
|
| Maximum input frequency | Approx. 1000rpm |
|---|---|
| Minimum input frequency | 0.1rpm |
| Minimum detection pulse width | 5μs |
| Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (Ic＝Approx. 10mA) |
| Display section | |
| Display unit | 3.5 inch TFT color LCD |
|---|---|
| External I/O signal | |
| External output (8) | ex) high and low limit outputs |
|---|---|
| External input (10) | ex) hold control input, digital zero input(DZ) |
| Interface | |
| Standard |
SIF：2-wire serial interface USB：USB interface |
|---|---|
| Option | D3V：D/A converter voltage output (3ch) |
| General specifications | |
| Power supply | DC24V (±15%) |
|---|---|
| Power consumption | 6W typ. |
| Operating conditions |
Operation temperature：-10 to +40℃, storage temperature: -40 to +80℃ humidity：85%RH or below (non-condensing) |
| Dimension | 96(W)× 96(H)× 138(D)mm (excluding projections) |
| Weight | Approx. 1.0kg |
| CE marking certification | EMC directives EN61326-1 |
| Attachments | |
|
Operation manual･･････1 External input/output connector･･････1 Cable for connecting UTMⅡ/UTMV (2m)･････1 Operating tool (with D/A converter(3ch) option)･･････1 |
|
| Model | Description |
| DTC2 | Case for TM700 (with AC power supply) |
|---|---|
| CA372-I/O | Cable with FCN connector at one-end 3m |
| CA81-USB | miniUSB-computer USB cable 1.8m |
| CATM21-M | 2m cable for connecting UTMⅡ/UTMV |
| CATM51-M | 5m cable for connecting UTMⅡ/UTMV |
| CATM(R)21 | 2m cable for UTMⅡwith rotary encoder connection (non-connector at one end) |
| CATM(R)21-M | 2m cable for connecting UTMⅡrotary encoder |
| CATM(R)51-M | 5m cable for connecting UTMⅡrotary encoder |
| CN50 | FCN series I/O connector (with cover) |
| CN55 | FCN series I/O connector (with diagonal cover) |
| CN73 | D/A converter(3ch) connector |
| CN90 | Waterproof plastic connector for UTMⅡ/UTMV |
| CN91 | Waterproof plastic connector for UTMⅡrotary encoder |
| GMP96x96 | Rubber seal |
| TSU03 | DC lighting surge unit |
|
Product catalogue(PDF)
|
TM700 catalogue(491 KB) | |
|---|---|---|
