More than 25 modules suitable for SIL 3 applications according to IEC 61508, IEC 61511.
Independent power supply circuit for each channel.
Double units are equivalent to two single units because of the absence of common circuitry.
Single channel versions available if required, to provide single loop integrity on Emergency Shut Down and Fire & Gas applications.
Configuration components are easily accessed by removing cover.
DIP switch configurability for easy field setup.
LED indication for power, signal status and line fault conditions.
Modules accept DC power supply over a wide range for 24 Vdc (20-30 Vdc) applications.
Wide operating temperature range: -40 to +60/+70 °C.
Installation in Zone 2 / Division 2.
Certified for Offshore and Marine applications.
High performance
High signal transfer accuracy and repeatability.
Advanced circuitry provides very low heat dissipation, ensuring modules run cool despite their high density and functionality.
SMD manufacturing to maximize lifetime and enhance reliability.
Complete absence of electrolytic capacitors ensures minimum 20 years lifetime.
Wide functionality
Wide range of digital and analog I/O.
SIL 3 Safety Relay contacts rated for 4 A or 10 A for direct switching of high loads.
Three port galvanic isolation to eliminate noise,ground loop problems and to provide Intrinsic Safety without a high integrity safety earth connection.
Line fault alarm detects open or short circuit of field cables.
Optional power bus DIN-Rail connector.
Standard Termination Board, custom connectors for integration into customized Boards.
EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
Certifications and Approvals
D5000 Series is applied for:
Intrinsic Safety Certification to CENELEC according 94/9/EC (ATEX).
Sensorik Automation Sdn BhdSICK Sensor, Qlight Malaysia, Cable ID printer Johor Bahru (JB), Meanwell Power Supply, Hot Marker Tubing Supplier ~ Sensorik Automation Sdn Bhd
