| General Specifications | |
| Sensing distance | 70…1000mm |
| Adjustment range | 90…1000mm |
| Unusable area | 0…70mm |
| Standard target plate | 100mm×100mm |
| Transducer frequency | About 225kHz |
| Response delay | About 125ms |
| Indicators/Operating means | |
| LED blue | Power on |
| LED yellow |
indication of the switching state Flashing:program function object detected |
| LED red |
permanently red: Error Red,flashing:program function,object not detected |
| Electrical specifications | |
| Operating voltage U B | 10…30VDC,ripple10%ss |
| Power consumption P 0 | ≤20mA |
| Input | |
| Input type |
1 TEACH-IN input Operating distance A1:-U B …+1V,operating distanceA2:+6… + U B Input impedance:＞4.7KΩ TEACH-IN programmable pulse :≥1S |
| Output | |
| Output type | 1 switch output E5,PNP NO/NC,programmable |
| Rated operational current | 200mA,short-circuit/overload protected |
| Default setting | Switching point A1:70mm Switching point A2: 800mm |
| Voltage drop | ≤ 3V |
| Repeat accuracy | ≤ 1% |
| Switching frequency f | ≤ 4HZ |
| Range hysteresis H | 1% of the set operating distance |
| Temperature influence | ± 1.5% of full-scale value |
| Ambient conditions | |
| Ambient temperature | -25…70℃(248...343K) |
| Storage temperature | -40…85℃(233...358K) |
| Mechanical specifications | |
| Protection grade | IP67 |
| Connection | V1 connector(M12×1),4-pin |
| Material Housing | brass,nickel-plated |
| Transducer |
epoxy resin/hollow glass sphere mixture; Polyurethane foam |
| Weight | 25g |
Malaysia
