This all in one vertical system integrates a 10kW pure sine wave inverter and a 13.44kWh LiFePO battery into a single compact cabinet (750×470×250 mm). With a plug and play design, installation is quick and space saving. The system supports off grid and hybrid output modes, features dual MPPT solar charge controllers (total 11,000W, max open circuit voltage 500V+500V), and delivers a maximum solar charging current of 200A plus grid/generator charging current of 120A. It is ideal for whole home backup, solar self consumption, peak valley arbitrage, and small commercial applications.
Key Features
Integrated All in One Design: Inverter module (INV10KLP1-V5.0) and battery module (48V 280Ah, 13.44kWh) are housed in the same enclosure – simple installation and clean appearance.
Flexible Output Modes: Supports off grid and hybrid operation, seamlessly switching between grid, PV, and battery power.
High Power Output: Rated output power 10,000W, peak 20,000VA – capable of driving 6HP motor loads, meeting high power household and light industrial equipment needs.
Dual MPPT Solar Input: Each MPPT handles up to 5,500W array power, for a total PV input of 11,000W – maximizing solar energy utilization.
Large Expandable Battery Capacity: Single battery module 13.44kWh (48V 280Ah LiFePO cells); supports up to 4 units in parallel for a total of 53.76kWh.
Long Cycle Life: ≥6,000 cycles @80% DOD, 0.5C, 25°C; cells certified to IEC62619.
Intelligent BMS with Full Protection: Integrated BMS provides comprehensive protection against over charge, over discharge, over current, over temperature, short circuit, and fault detection.
Multi source Charging: Supports PV charging and grid/generator charging, which can operate simultaneously; max PV charge current 200A, max grid/generator charge current 120A.
LCD Display: Dynamically shows system operating status (voltage, current, power, SOC, etc.).
APP Real Time Monitoring: Remote data viewing and parameter adjustment via smartphone APP – easy maintenance and management.
Easy Parallel Expansion: Supports up to 2 inverters in parallel (total 20kW) and up to 4 battery modules in parallel – flexible power and capacity scaling.
Safety Certifications: Battery certified to UN38.3, MSDS, IEC62619:2017; system complies with EN IEC61000 3 2, EN IEC61000 6 1, RoHS.
Applications
Residential PV storage, off grid systems, backup power, small commercial energy storage, solar storage charging integration, peak valley tariff management.
