The ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Drive® dual voice coil dual gap 15" woofers. These woofers feature neodymium magnets and ultra robust cones for extra long life.
| Frequency Range (-10dB) | 32 Hz - 1 kHz |
| Frequency Response (±3 dB) | 38 Hz - 1 kHz |
| Transducer Power Rating (AES) | 1600 W (6400 W peak), 2 hrs |
| Input Modes | Drivers Parallel / Drivers Discrete |
| System Power Rating | 1350 W (5400 W peak), 100 hrs. |
| Maximum SPL (1m) | 35 Hz - 400 Hz: 132 dB-SPL cont avg (138 dB peak) |
| System Sensitivity | 35 Hz - 400 Hz: 100 dB-SPL, 1W (2.0V) @ 1m |
| Nominal Impedance | 4 ohms in parallel-drive mode2 x 8 ohms in discrete-drive mode |
| LF Driver | 2 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® drivers |
| Enclosure | Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood |
| Suspension Attachment | 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware |
| Finish | Black DuraFlex™ finish.White available upon request. |
| Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
| Input Connector | NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
| Environmental | Mil-Std 810; IP-x3 per IEC529. |
| Dimensions (H x W x D in vertical orientation) | 965 x 419 x 597 mm(38.0 x 16.5 x 23.5 in) |
| Net Weight (each) | 36.7 kg (81.0 lb) |
| Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers |
| Nominal LF Driver Impedance | 4 ohms in parallel-drive mode 2 x 8 ohms in discrete-drive mode |
Malaysia
