Installing an EV charger is not just about mounting the unit on the wall and connecting a cable. It is an electrical installation that must be designed, protected, tested and commissioned correctly. We supply and install EV chargers based on your site requirement, vehicle charging need and available electrical supply. This includes single phase AC chargers, three phase AC chargers, 22kW wallbox chargers, portable EV chargers and larger DC charger installations. Our installation approach includes proper electrical testing and commissioning using a Fluke 1664FC Multifunction Tester, including trip testing and verification works that are often skipped in basic charger installations. An EV charger is a continuous high-current load. A poor installation can lead to nuisance tripping, overheating, wrong protection selection, poor earthing, unsafe operation and future maintenance problems. Many installations focus only on making the charger work. Our focus is different. We look at the electrical supply, protection device, cable route, earthing, load capacity, charger rating, testing and commissioning. This is especially important for higher power AC chargers, three phase chargers, shared parking areas, commercial premises and DC charger installations. We are able to install different types of EV chargers based on the site requirement, usage pattern and available supply capacity. Suitable for homes, small offices and locations with single phase electrical supply. Typical charging capacity depends on site supply and charger setting. Suitable for faster AC charging where three phase supply is available, including 11kW and 22kW wallbox chargers. For commercial, fleet, workplace, public charging and high-utilisation charging applications where DC fast charging is required. Residential charger installation for landed homes, private parking bays and home charging upgrades. EV charging installation for offices, factories, hotels, retail locations, apartments, condominiums and commercial parking areas. We can advise on suitable sockets, protection, wiring and safe usage for portable EV charger applications. Many EV charger installations stop after wiring and basic power-on checks. We go further by performing proper electrical verification using a Fluke 1664FC Multifunction Tester. We perform AC trip and DC trip related verification where applicable, depending on charger type, protection arrangement and installation design. We verify protection operation so that the installation is not only energised, but checked for safer operation. We support proper commissioning checks before handover, helping reduce future disputes and installation uncertainty. Earthing and continuity verification are important for safe EV charger operation and electrical fault protection. Where applicable, insulation resistance testing helps identify cable or installation issues before the charger is put into service. We check charger power-up, indication, connection, charging readiness and normal operating behaviour during commissioning. Review supply type, available capacity, charger location, cable route, DB location, earthing and protection requirements. Select the correct charger type: portable, single phase AC, three phase AC, 22kW wallbox or DC charger based on user need. Determine cable size, protection device, isolator, RCBO / RCD arrangement, load balancing and future upgrade requirements. Install charger, metal DB where required, isolator, protection device, cabling, conduit, trunking and accessories. Perform electrical checks, trip testing and commissioning using Fluke 1664FC Multifunction Tester. Guide user on charger operation, app usage where applicable, safe charging practice and basic troubleshooting. The actual scope depends on charger type, site condition, cable route, supply capacity and protection requirements. A typical AC charger installation can include: Home EV charger installation for porch, car porch, garage and private parking areas. EV charging for staff, directors, visitors, fleet vehicles and sustainability initiatives. EV charger installation subject to management approval, electrical capacity and parking bay arrangement. AC and DC charger installation for customer parking, tenant facilities and EV charging service points. Support for multiple chargers, load planning, three phase distribution and operational charging requirements. Support for commercial AC and DC charger installation, testing and commissioning works. EV charger installation must be done safely and properly. Whether you need a home AC wallbox charger, portable charger support, three phase 22kW charger or commercial DC charger installation, we can support the supply, installation, testing and commissioning works. Our process includes correct charger selection, electrical installation, protection arrangement, trip testing and commissioning using Fluke 1664FC Multifunction Tester. Contact us for site assessment, charger selection, installation quotation or testing and commissioning support.
EV Charger Supply, Installation, Testing & Commissioning
EV Charger Installation Done Properly
For AC wallbox chargers, portable chargers, commercial AC chargers and DC fast chargers in Malaysia.
AC Chargers DC Chargers Single Phase Three Phase Wallbox Chargers Portable Chargers Trip Testing Fluke 1664FC MFT
Why Proper EV Charger Installation Matters
A charger should not just be installed. It should be electrically verified, trip tested and commissioned before handover.
Types of EV Chargers We Can Install
Single Phase AC Chargers
Three Phase AC Chargers
DC Fast Chargers
Home EV Chargers
Commercial EV Chargers
Portable Charger Support
Our Difference: We Test and Commission Properly
Trip Test Verification
Protection Device Testing
Commissioning Record
Earth and Continuity Checks
Insulation Resistance Checks
Functional Charging Test
Our Installation Process
Site Assessment
Charger Selection
Electrical Design
Installation Works
Testing and Commissioning
Handover and User Guidance
Typical Installation Scope
Item
Typical Scope
EV Charger Installation
Installation of wallbox EV charger or selected EV charging equipment at agreed location.
Protection and Isolation
Metal DB, RCBO / RCD arrangement, isolator and related protection devices where required.
Cabling and Containment
Supply and installation of suitable cable, PVC conduit, trunking or containment based on site route.
Trip Testing
Trip test and verification using Fluke 1664FC Multifunction Tester where applicable.
Commissioning
Power-up, functional check, protection verification, charger status check and charging readiness check.
Additional Works
Hacking, concealing, long cable routes, civil works, coring, special mounting, load upgrade or authority-related works are quoted separately.
Suitable for Homes, Businesses and Commercial Sites
Landed Homes
Offices and Factories
Condominiums and Apartments
Retail and Commercial Buildings
Fleet Charging
Public and Semi-Public Charging
Why Choose Us?
We do not treat EV charger installation as a simple plug-and-leave job. We install, test, commission and hand over properly.
Product Summary
EV Charger Installation — Done Properly, Tested Properly, Commissioned Properly.
Malaysia
