Labindia Tap Density Tester TD 1025: Top Choice in Selangor, KL, Malaysia, Subang Jaya SCIENCEGATES SDN BHD

Description

Tap Density Tester TD 1025

Tap density tester TD 1025 is designed to measure the tapped volume and/or density of powders, granules and other similar products. Tap density tester comes with two tapping position for 14mm and 3mm with cylinder holders which hold 100ml and 250ml glass cylinders.

This instrument calculates Tapped Density, Compressibility Index, Hausner Ratio and Bulk Density. The unique design of the tap density tester enables simultaneous tapping and rotating motion. The tap density tester TD 1025 can be connected to a balance for sample weight transfer or a PC to download the methods. Other accessories like 50ml and 25ml volume glass cylinders are also available.

Standard Features of Tap Density Tester TD 1025

Designed to meet current USP and ASTM specifications for tap density testing.
Two Tapping Positions for 14mm and 3mm respectively with cylinder holders to hold 100ml and 250 ml cylinders.
The unique simultaneous tapping and rotating motion assures that the material is evenly packed.
Calculates results - Tapped Density, Compressibility Index, Hausner Ratio and Bulk Density.
Balance Interface for sample weight transfer.
PC Based Data downloading facility using EDC 21software over LAN (Optional)
Low Volume Cylinder Adapters - 10 ml, 25 ml, 5o ml Cylinders - ASTM Compliant (Optional)
100 ml SS Cylinder - USP Method III (Optional)

Typical Specification

Parameters	Specifications
Test Method	USP Method I(300 taps per minute) USP Method II (250 Taps per minute) USP Method Ill (55 taps per minute) and ASTM (Optional)
Tap Count Range	10-9999
Type of Drive	Direct Drive with steeper motor
Drop height	Position I= 14, ± 2mm Position II = 3, ± 0.2mm)
Platform rotation	5-15 rotation I minute
Display	20X2 Line back lighted LCD display
Keyboard	Alphanumeric splash waterproof polyester soft keys
Operating Modes	USP, User selectable
Output Printer RS 232C	Parallel Port PC Connectivity for Data Downloading
Cylinders	Optional Cylinder = 1 each, 100ml & 250ml, Glass. For ASTM test - 10ml,25ml and 50ml, Glass For USP Ill :- 100mL SS cylinder
Cylinder Holder	Optional Adapters = 1each for 100 ml & 250 ml. For ASTM test - 10mL,25mL and 50ml cylinder, For USP Ill :- 100mL SS cylinder
Power Requirement	230VAC / 50 HZ, 45W
Environmental Operating Conditions	a) Operation Indoor b) Temperature ambient to 45° c c) Humidity 20% to 80%
Dimensions (Approx)	340 X 310 X 200 mm (J'I X D X H)
Shipping weight (Approx)	13 kg

More detail about SCIENCEGATES SDN BHD