Drilling on six sides of the workpiece in a single cycle, with grooving available on the front and back sides.
The machine supports a minimum board size of 35 × 70 mm and allows complete processing in one operation.
The feeding and discharging tables are equipped with air flotation holes to reduce friction and protect the workpiece during movement.
The Y-axis is equipped with linear guide rails to ensure high processing accuracy and efficiency.
Double grippers combined with an automatic side alignment device ensure stable positioning of the panel during processing.
Open docking interface compatible with XML, BAN, MPR and other file formats, allowing seamless connection with design and disassembly software. Barcode scanning is supported, and no manual programming is required.
.jpg)
Equipped with a three-speed intelligent lifting gripper with patented design.
During feeding, the gripper is positioned 0.2–0.3 mm lower than the table surface, allowing smooth loading of panels.
During idle movement, the gripper is positioned 0.1 mm higher than the table surface to avoid scratches on the board.
Ensures high accuracy for horizontal hole drilling on small panels by keeping the gripper flat on the table during processing.
Accurate hole positioning with integrated dust removal function. Adaptive gripper switching reduces the total number of grippers required.
.jpg)
Exclusive customized row drilling package.
Integrated drill pack with built-in auxiliary pressure roller to improve drilling stability.
Customized 3D home control system.
Dynamic acceleration algorithm to improve processing efficiency.
Adaptive speed algorithm for slotting operations.
Dynamic positioning algorithm for special-shaped panels.
Minimum tool lift path algorithm to reduce idle movement time.
Tool slot offset can be adjusted freely according to processing requirements.
| Six Sided Drilling Machine Configuration Table | |||||
| NO | Matter | Details | Illustrate | Remark | |
| 1 | Basic information | Basic information | Device model |
T-E12 Dual Boring Head |
|
| 2 | Processing range | Processing plate size range: | Length range | 70MM-2750MM | |
| Width range | 35MM-1200MM | ||||
| Thickness range | 12-50MM | ||||
|
Processing type |
Processing hole type: see process details | Cutter | |||
| Door reaming processing method (whether independent drilling group) | Upper drilling package | Integrated in the upper drill package | |||
| Special-shaped plate (whether it can be processed) | Can be processed | ||||
| Six-sided drill gripper (fixed or not) | Smart three-level function | Exclusive patent | |||
| 3 | Device Configuration | Drill package parameters | Drill package quantity |
Upper drilling package X1 Lower drilling package X1 |
|
| Quantity of drill bits for upper left drilling package | 12 vertical drills, 6 horizontal drills, 12 auxiliary cylinders | ||||
| Quantity of drill bits on the lower drilling package | 6 vertical drills, 2 auxiliary cylinders | ||||
| Auxiliary pressure plate quantity of drill package | 12 built-in drill packages are integrated as a whole | ||||
| Quantity of upper spindles | 3.5KW spindle X1 sets | ||||
| Quantity of lower spindles | 3.5KW spindle X1 sets | ||||
| Basic parameters | Program docking (file format) | MPR/XML/DXF/BAN | |||
| Usage mode (automatic connection usage) | Can be used alone or online | ||||
| Scan Mode (Scan Method) | QR code scanning | ||||
| Total equipment power | About 23KW | ||||
| Working pressure | 0.8Mpa/m2 | ||||
| Equipment net weight | About 3700KG | ||||
| Travel of each axis & maximum positioning speed & power | X axis | 130M/min/750W | |||
| Y axis | 80M/min/1.5KW | ||||
| Z axis | 50M/min/1.5KW | ||||
| U axis | 130M/min/750W | ||||
| V axis | 80M/min/750W | ||||
| W axis | 50M/min/750W | ||||
| A axis | 80M/min/750W | ||||
| Z2 axis | 50M/min/1.5KW | ||||
| Y2 axis | 80M/min/1.5KW | ||||
| Equipment size | Long | 5436MM | |||
| Width | 2880MM | ||||
| High | 2300MM | ||||
| Device name | Equipment brand | Quantity | |
| The main production equipment | High-precision automatic pentahedron gantry machining center | Imported from Taiwan AWEA | 5 |
| High Precision Vertical CNC Machining Center | CARLOS | 6 | |
| Welding Robot | JAPAN OTC | 8 | |
| Laser Fiber Metal Cutting Machine | BAI SHENG | 2 | |
| Laser Interferometer | U.K. RENISHAW | 2 | |
| Ballbar | U.K. RENISHAW | 2 | |
| Vibration Aging Meter | SHENHUA | 2 | |
| Bending machine | 4 | ||
| Sawing machines, milling machines, punching machines, etc. |
|
2、Equipment advantage
|
Malaysia
