About GHV 35 Series
| ITEM | GHV 3580 | GHV 35120 | GHV 35160 | GHV 35200 | GHV35240 | |
| CAPACITIES | Swing over bed | 900mm(35") | ||||
| Swing over carirage | 750mm | |||||
| Distance between center | 2000mm | 3000mm | 4000mm | 5000mm | 6000mm | |
| HEADSTOCK | Spindle bore | 155mm ( A2-11)/250mm(A2-15)/305mm380mm(A2-)20 | ||||
| Spindle speed range | 155mm 4-800rpm/250mm305mm380mm4-400rpm | |||||
| Spindle speed steps | 4 steps | |||||
| Main motor | 30HP with invertor | |||||
| Longitudinal feeds | 0.04mm/rev | … 1.0mm/rev | ||||
| Longitudinal rapid | 0.02mm/rev….0.5mm/rev | |||||
| CARRIAGE & APRON | Width of carriage | 900mm | ||||
| Width of cross slide | 350mm | |||||
| Cross slide travel | 390mm | |||||
| Compound slide travel | 220mm | |||||
| Tool post | 180mm | |||||
| Feed motor | 3HP with invertor | |||||
| TAILSTOCK | Diameter of quill | 165mm | ||||
| Travel of quill | 250mm | |||||
| Center | M.T. #6 | |||||
| Bed width | 900mm(35.4") | |||||
| Net weight | 5500kgs | 6500kgs | 7500kgs | 8500kgs | 9500kgs | |
| Packing size W: 2200mm H: 2200mm | L:4700mm | L:5700mm | L:6700mm | L:7700mm | L:8700mm | |
| •Specification is subject to change without further notice. | ||||||
Malaysia
