E+H EngyCal RH33 BTU meter: Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Subang Jaya NYKK ENGINEERING GROUP SDN BHD

Description

Custody transfer BTU meter for recording heat quantities of water

The BTU meter RH33 is used in applications with liquid energy carriers.

It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device.

Potential for cost savings can be shown by using the software available as an accessory.

The device has a custody transfer approval and allows bi-directional measurement, e.g. charging/discharging of a heat accumulator.

Benefits

Transparent energy consumption helps you save on energy costs
Calibrated, electronically paired temperature sensors ensure the highest accuracy and enable replacement of individual temperature sensors even for certified devices in the field (without reapproval!)
Tariff counter for requirements-based billing
Detailed data logging of current and counter values and of error messages, off-limit conditions and changes to operating parameters
Standard models are suitable for connecting and supplying all common volume flow transmitters and temperature measuring points
Remote readout via Ethernet and fieldbuses
Verified and certified reliability and accuracy

Field of application

Recording and billing the quantities of heat and cold in:

Heating circuits
Cooling circuits
Combined heating and cooling circuits

Typical application areas in industry, long-distance heat networks and building automation.

Features and specifications

Measuring Principle	Energy manager
Function	Monitoring and billing of energy in heating and cooling applications as well as combined heating-and cooling circles. Typical applications can be found in industries, district heating and building automation.
Certification	CE, UL listed, CSA GP, MID 004 (custody transfer) according EN1434 (water/other liquids) and OIML R75
Input	1x Puls/Analog, 2x RTD/Analog, Loop power supply 24V DC (+/-16%)
Output	1x 4...20mA, 2x digital (Open Collector)
Relay output	2x
Auxiliary power supply	Low voltage power supply: 100 bis 230 V AC (-15% / +10%); Small voltage power supply: 24 V DC (-50% / +75%), 24 V AC (±50%)
Dimensions (wxhxd)	144 x 144 x 103.1 mm (5.67'' x 5.67'' x 4.06'')
Software	Calculated Values: Energy, volume, density, enthalpy & enthalpy difference, DP-Flow-Compensation, mass, temperature difference; Counters: volume, mass, energy, counter in case of failure Optional: tariff 1, tariff 2 or seperated heating energy, cooling energy, bilance energy
Operation	3 button on site or via FieldCare; read out of historical / logged data via Field Data Manager Software (SQL database and visualization interface), selectable language
Display	160 x 80 Dot-Matrix LCD with white backlit, colour change in case of alarm event, active display area 70 x 34 mm
Others	electronic temperature sensor matching via CvD coefficients, logbook measured values, custody transfer logbook, event logbook, limit monitoring
Calculations	IAPWS-IF97

More detail about NYKK ENGINEERING GROUP SDN BHD