About TAKISAWA NEX-106/106K
| ITEMS | UNIT | NEX-106 | NEX-106K | ||||
| CAPACITY | Swing Over Bed | mm | 350 | 360 | |||
| Swing on Cross Slide | mm | 280 | - | ||||
| Max. Swing (on front door) | mm | 445 | - | ||||
| Standard Turning Dia | mm | 190 | - | ||||
| Max Turning Dia | mm | 240 | - | ||||
| Max Turning Length | mm | 350 | 325 | ||||
| Bar Capacity | mm | 43 | 43 | ||||
| TRAVEL | X-Axis Stroke | mm | 140 | 280 | |||
| Z-Axis Stroke | mm | 350 | 350 | ||||
| SPINDLE | Spindle Speed | rpm | 5,000 | 6,000 | |||
| Chuck Size | 6” | - | |||||
| Spindle Nose | FLAT140 | FLAT140 | |||||
| Spindle Through HoleDia | mm | 56 | 56 | ||||
| Spindle Bearing Dia | mm | 80 | - | ||||
| Spindle No. | 1 | - | |||||
| TURRET | Turrent No | 1 | Gang Type | ||||
| Type of Turret | T12 | Gang Type | |||||
| Height of Square Tool | mm | 20 | 20 | ||||
| Dia of boring bar hole | mm | 32 | 32 | ||||
| TAILSTOCK | Stroke of Tailstock | mm | 290 | - | |||
| Tailstock Shaft Hole Dia | mm | 75 | - | ||||
| Taper of Tailstock | MT.4 | - | |||||
| Stroke of Tailstock Shaft | mm | 100 | - | ||||
| Stroke of X-Axis | mm | - | 280 | ||||
| Stroke of Z-Axis | mm | - | 325 | ||||
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 24 | 24 | |||
| Z-Axis Rapid Traverse Rate | m / min | 30 | 30 | ||||
| MOTOR | Spindle Motor | kw | 5.5/7.5 | - | |||
| Servo Motor X-Axis | Kw | 1.2 | - | ||||
| Servo Motor Z-Axis | kw | 2.5 | - | ||||
| Spindle Nose | - | FLAT140 | |||||
| Through Hole Dia | mm | - | 56 | ||||
| Spindle No. | - | 1 | |||||
| POWER | Electric | kva | 19 | - | |||
| TANK | Hydraulic | L(kw) | 40(1.5) | 40 | |||
| Coolant Tank | L(kw) | 160(0.4) | 160 | ||||
| Lubrication | L(kw) | 2(0.004) | 2 | ||||
| SIZE | Height | mm | 1,720 | 1,720 | |||
| Width | mm | 1,530 | 1,530 | ||||
| Length | Mm | 1,950 | 1,950 | ||||
| Weight | kg | 3,500 | 3,500 | ||||
| •Specification is subject to change without further notice. | |||||||
Malaysia
