Temperature Control: Maintain a stable environment for equipment and production.
Ventilation: Remove hot air, exhaust gases, and dust while supplying fresh air.
Humidity Control: Maintain required humidity levels for processes (e.g., low humidity for electronics, constant humidity for pharmaceuticals).
Air Cleanliness: Achieve specific cleanliness standards (e.g., cleanrooms).
Energy Efficiency & Environmental Compliance: Optimize energy usage and meet environmental regulations.
Air Conditioning System (Cooling & Heating)
Chillers (water-cooled or air-cooled)
VRF/VRV systems
Terminal units (Fan Coil Units, Air Handling Units – AHU)
Ventilation System
Supply air systems: Provide fresh air
Exhaust systems: Remove waste air and heat
Local exhaust systems (e.g., welding fume extraction, oil mist collectors)
Heat recovery systems for energy saving
Air Treatment Equipment
Air Handling Units (AHU)
Fresh Air Handling Units (FAHU)
Energy Recovery Ventilators (ERV)
Dehumidifiers / Humidifiers
Ductwork & Piping
Air ducts, refrigerant piping, chilled water piping
Valves, silencers, insulation materials
Control System
Building Automation System (BAS/BMS)
Temperature, humidity, pressure, and airflow control
Design Phase
Load calculation (cooling, heating, ventilation)
System design (ductwork, piping, equipment selection)
Installation Phase
Installation of equipment (chillers, fans, piping)
Ductwork and piping installation with insulation
Electrical and control system installation
Commissioning Phase
System testing and start-up
Air and water balancing
System fine-tuning and optimization
Handover & Acceptance
Performance testing
Operator training
As-built drawings and technical documentation
Electronics manufacturing (temperature & humidity control)
Food processing plants (hygiene and contamination control)
Pharmaceutical factories (cleanrooms)
Automotive plants (welding fume extraction)
Data centers (precision temperature and humidity control)
温度控制：确保设备和生产环境稳定运行。
通风换气：排出热空气、废气、粉尘，补充新鲜空气。
湿度控制：保持生产工艺要求（如电子厂需低湿度、制药厂需恒湿）。
空气洁净度：根据工艺需求达到一定等级（如无尘车间）。
节能与环保：优化能耗，减少排放，符合环保标准。
空调系统（Cooling & Heating）
冷水机组（Chiller）或 VRF 系统
风冷机组 / 水冷机组
末端设备（风机盘管、空调箱、AHU）
通风系统
送风系统：提供新风
排风系统：排出废气、热气
局部排风（如焊接烟尘、油雾收集）
热回收装置（节能）
空气处理设备
空气处理机组（AHU）
新风处理机组（FAHU）
能量回收装置（ERV）
除湿机 / 加湿器
管道系统
风管、冷媒管、冷冻水管
阀门、消声器、保温材料
控制系统
楼宇自控（BAS / BMS）
温度、湿度、压差、风量控制
设计阶段
负荷计算（冷负荷、热负荷、通风量）
系统方案设计（风管、管路、设备选型）
施工阶段
设备安装（冷水机组、风机、管道）
风管、水管铺设及保温
电气与控制系统安装
调试阶段
系统试运行
风量、水量平衡
系统优化调节
验收与交付
性能测试
培训操作人员
提供竣工图及技术资料
电子制造厂（恒温恒湿）
食品厂（防污染）
制药厂（洁净室）
汽车工厂（焊接排风）
数据中心（温湿度控制）
Malaysia
