A Medical Grade AHU (Air Handling Unit) is a specialized HVAC system designed for healthcare environments where air purity, microbial control, and reliability are life-safety requirements. Unlike standard commercial AHUs, these units must prevent the growth of pathogens within the system while maintaining precise pressure regimes to contain or exclude contaminants.
In 2026, all medical-grade installations in Malaysia must comply with MOH (Ministry of Health) clinical standards and the Energy Efficiency and Conservation Act (EECA) 2024, which mandates a low Building Energy Intensity (BEI).
To prevent the AHU from becoming a breeding ground for mold or Legionella, the internal construction follows a strict hygienic protocol:
Stainless Steel (SUS 304/316) Lining: The internal skin is non-porous and resistant to the corrosive chemical biocides used for sterilization.
TB2 Thermal Break Casing: This is a 2026 technical requirement to prevent "casing sweat" (external condensation). In Malaysia's high humidity, moisture on the unit leads to external mold growth, which is a major violation of clinical audits.
Multi-Sloped Drain Pans: Sloped in multiple directions toward the outlet to ensure zero standing water. These are often made of SUS 316 for maximum longevity.
Air treatment in medical settings follows a tiered approach to ensure "Surgical Grade" purity:
Primary Filtration (G4/F7): Captures large particulates and dust to protect the AHU’s internal efficiency.
UV-C Germicidal Irradiation (UVGI): 254nm UV-C lamps are positioned to bathe the cooling coil and drain pan. This destroys the DNA of bacteria and viruses and eliminates "bio-fouling" (slime) on the coils, keeping the heat transfer efficient.
Terminal HEPA (H13/H14): For high-risk areas like Operating Theaters (OT) and Intensive Care Units (ICU), HEPA filters remove 99.97% to 99.99% of sub-micron particles, including viral carriers.
| Feature | Standard AHU | Medical Grade AHU |
| Interior Material | Galvanized Steel (GI) | Stainless Steel (SUS 304/316) |
| Airtightness | L3 Leakage | L1 Precision Sealed (Airtight) |
| Pathogen Control | Filtration Only | Filtration + UV-C + $Ag^+$ Coating |
| Casing Rating | Standard Double-Skin | TB2 Thermal Break (Anti-Sweat) |
| Pressure Control | Neutral | Active Cascade Control (+/- Pa) |
| Compliance | General Comfort | MOH / HTM 03-01 / VDI 6022 |
Medical facilities are high energy users. To maintain compliance without sacrificing safety, modern medical AHUs utilize:
IE5 EC Fan Arrays: These modular "Fan Walls" provide N+1 Redundancy. If one fan fails, the others ramp up to maintain the sterile pressure regime. They are 30% more efficient than traditional belt-driven fans.
Low SFP (< 1.1 $kW/m^3/s$): By utilizing low-velocity coils and aerodynamic 3D BIM-coordinated duct transitions, the system achieves lower Specific Fan Power (SFP).
EnMS Integration: All units connect to an Energy Management System (EnMS) to provide the auditable data required for mandatory statutory energy reports.
Operating Theaters (OT): Positive pressure (+) to keep contaminants out.
Isolation Wards: Negative pressure (-) to keep pathogens in.
Pharmacy & Labs: Strict temperature/humidity control ($\pm 0.1^{\circ}\text$) to maintain material integrity.
EKG (Malaysia) SDN BHD specializes in the engineering and installation of these high-purity systems. Our units are designed to be silent, sterile, and ultra-efficient, ensuring your facility passes both clinical and energy audits with a 5-star rating.
How are you currently managing the pressure gradients in your facility’s critical care zones?
更多 EKG M & E SDN BHD 相关资料
Malaysia
