The Earthing Insulation Piercing Connector (IPC) – Class A1 is a specialised connector designed for short-circuiting, earthing, and voltage measurement of low-voltage Aerial Bundled Conductors (ABC). Built with a shear head screw for reliable tightening, watertight protection, and a potential-free design for operator safety, it delivers high performance and long-term durability. With a short-circuit capacity of 4,000 A for 1 second and current ratings of 180 A and 300 A, this connector is fully compliant with NF C 33-020, EN 50-483, and TNB technical specifications, making it a trusted solution for utility-approved applications.
General Features & Benefits:
Insulation piercing performed on both the main conductor and tap rigid copper conductor in a single tightening operation
Dielectric strength greater than 6 kV in water
Shear head screw with yellow indicator provides clear ground-level confirmation of proper tightening
Potential-free tightening screw for operator safety
Flexible end cap ensures proper conductor insertion by hand, with long-term watertight protection using membranes and grease
Cap glued to the connector body to prevent loss during handling, installation, or outdoor exposure
Integral protective socket cap prevents water penetration and corrosion
Short-circuit capacity: 4,000 A for 1 second
Current rating: 180 A (K361_MAL) and 300 A (K364_MAL)
Operational voltage: 415 V
Fully compliant with NF C 33-020, EN 50-483
Certified with TNB Sijil Guna Pakai (SGP) and compliant with TNB & SESB technical specifications.
Reference:
MALAYSIAN TNB STANDARD
.png)
.png)
Option:
The short-circuiting and earth system socket (PMCC) can be sold separately.
.png)
If there are any inquiries, please leave your message below.
Malaysia
