CD4060BF

BUY CD4060BF https://www.utsource.net/itm/p/23624.html
IC,COUNTER,UP,14-BIT BINARY,CMOS,DIP,16PIN,CERAMIC

Instructions for Using CD4060BF

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 3.0V to 18V.
   • Connect the ground (GND) pin to a stable reference point.

2. Oscillator Configuration:

   • The CD4060BF includes an oscillator circuit. Connect external resistors and capacitors to pins 9 (R1), 10 (R2), and 11 (C1) to set the oscillation frequency.
   • For example, to achieve a 1Hz clock, use R1 = 1MΩ, R2 = 10kΩ, and C1 = 0.01μF.

3. Output Selection:

   • The CD4060BF provides 14 outputs (Q4 to Q13) which are binary counts of the input clock.
   • Use these outputs based on the desired division ratio. For instance, Q4 is a divide-by-16 output, Q5 is a divide-by-32 output, and so on.

4. Reset Function:

   • Pin 12 (MR) is the master reset. Set it to high to reset the counter.
   • To keep the counter running, connect MR to GND.

5. Power-On Reset:

   • If a power-on reset is required, use a capacitor from MR to GND. This will ensure the counter resets when power is applied.

6. Handling Static Electricity:

   • The CD4060BF is sensitive to static electricity. Use proper ESD protection when handling the device.

7. Decoupling Capacitors:

   • Place a 0.1μF ceramic capacitor close to the V_DD and GND pins to filter out noise and stabilize the power supply.

8. Temperature Considerations:

   • Ensure the operating temperature is within the specified range (-40°C to 85°C) to avoid damage or malfunction.

9. Storage:

   • Store the device in a dry, cool place within the storage temperature range (-65°C to 150°C).

10. Testing:

    • Before integrating the CD4060BF into a circuit, test it with a simple oscillator and counter setup to verify its functionality.

By following these instructions, you can effectively use the CD4060BF in your digital circuits.