BUY LM6134BIM https://www.utsource.net/itm/p/36172.html
The LM6132/34 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 μA/amp supply current, the 10 MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.
The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating.
Operating on supplies from 2.7 V to over 24 V, the LM6132/34 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.
Description: The LM6134BIM is a high performance, low power, rail-to-rail, input/output operational amplifier.
Features:
* Wide supply range: 2.7V to 16V
* Low supply current: 2.5mA/amplifier
* Low input offset voltage: 250μV
* Low input bias current: 0.1nA
* Rail-to-rail input/output
* High slew rate: 1.5V/μs
* High open-loop gain: 1.2MHz
Applications:
* Portable instrumentation
* Battery-powered systems
* Active filters
* High-speed integrators
* Portable medical equipment
* Data acquisition systems
(For reference only)
