| SPECIFICATIONS | 
		
			| Conductor | 
		
			| Number of Pairs | 4 | 
		
			| Total Number of Conductors | 84 | 
		
			| AWG | 244 | 
		
			| Stranding | Solid4 | 
		
			| Conductor Material | BC - Bare Copper | 
		
			| Insulation | 
		
			| Insulation Material | PO - Polyolefin | 
		
			| Overall Cabling | 
		
			| Overall Cabling Fillers | Central Spline | 
		
			| Overall Cabling Core Wrap | Polyester Tape | 
		
			| Outer Shield | 
		
			| Outer Shield Type | Tape | 
		
			| Outer Shield Matrial | Aluminum Foil – Polyester Tape | 
		
			| Outer Shield % Coverage | 100% | 
		
			| Outer Shield Drain Wire | 
		
			| Outer Shield Drain Wire Nom. Diameter | 0.40 mm | 
		
			| Outer Shield Drain Wire Conductor Material | TC – Tinned Copper | 
		
			| Outer Jacket | 
		
			| Outer Jacket Material | LSNH – Low Smoke Non-Halogen | 
		
			| Outer Jacket Ripcord | Yes | 
		
			| Overall Nominal Diameter | 
		
			| Overall Nominal Diameter | 7.1 mm | 
		
			| Machanical Characteristics | 
		
			| Operating Temperature Range | - 20℃ To + 75℃ | 
		
			| Bulk Cable Weight | 49 kg/km | 
		
			| Max. Recommended Pulling Tension | 110 N | 
		
			| Min. Bend Radius (Install) | 56.8 mm | 
		
			| Applicable Standards | 
		
			| NEC/(UL) Specification | UL 444 | 
		
			| IEC Specification | 11801 Category 6 | 
		
			| EU RoHS Compliant (Y/N) | Y | 
		
			| EU RoHS Compliance Date | Oct 2007 | 
		
			| TIA Specification | 568-C.2 Category 6 | 
		
			| Flame Test | 
		
			| IEC Flame Test | 60332-1 Flammability | 
		
			| Suitability | 
		
			| Suitability – Indoor (Y/N) | Y | 
		
			| Suitability - Outdoor (Y/N) | N | 
		
			| Sunlight Resistance (Y/N) | N | 
		
			| Oil Resistance | N | 
		
			| Non-halogenated | Y | 
		
			| Plenum/Non-Plenum | 
		
			| Plenum (Y/N) | N | 
		
			| Electrical Characteristics | 
		
			| Nom. Mutual Capacitance @ 1 KHz | 5.6 nF/100m | 
		
			| Maximum Capacitance Unbalance | 330 pF/100m | 
		
			| Nominal Velocity of Propagation | 65 % | 
		
			| Maximum Delay @ 100 MHz | 538 ns/100m | 
		
			| Maximum Delay Skew | 45 ns/100m | 
		
			| Maximum Conductor DC Resistance @ 20 Deg.C | 9.38 Ohms/100m | 
		
			| Maximum DCR Unbalance @ 20 Deg.C | 5 % | 
		
			| Maximum Intended Operating Voltage | 300 V RMS |