FLEXIBLE CRYSTALLINE CEMENTITIOUS WATERPROOFING COMPOUND
Description
PENTENS T-308 FLEX is a two-component, penetrating cementitious, reactive crystalline nano-capsule core self-healing technology waterproofing material. The active chemicals which react with moisture and free lime in the concrete or cement-based materials will cause a catalytic reaction that creates a non-soluble crystalline formation which crystallizes in the pores and capillary tracks. At micro level, shrinkage cracks from drying might create passageways for moisture infiltration. If problem occurs while crystals are still forming, micro-cracks up to 0.4mm can be bridged. If problems occur later, the water will infiltrate water reactive proofing chemicals, allowing the concrete to heal itself on a micro scale.
PENTENS T-308 FLEX technology enhances the natural hydration process in concrete, increases compressive strength over time and dramatically reduces cracks caused by shrinkage. PENTENS T-308 FLEX has the characteristic of apply self-sealing in 24 hours. PENTENS T-308 FLEX can be applied as a second coating to reinforce PENTENS T-308M Crystalline Cementitious Waterproofing Compound. For damp proof areas, T-308 FLEX can be applied to the concrete surface.
Uses
PENTENS T-308 FLEX is used to waterproof areas as indicated below:
Basement floors and retaining walls
Concrete flat roofs
Water retaining / excluding structures
Underground vaults and foundation
Bridges and tunnels
Lift pits
Swimming pools
Potable water tanks
Water tanks, reservoirs, sewage and water treatment plants
Internal & external parking structures
Advantages
Low VOC
Environmentally friendly
Self-healing
Apply to both positive and negative concrete surface
Resistance agianst positive and negative hydrostatic pressure
Permanently sealed against the penetration of water from any direction
Highly resistant to aggresive chemicals
Aid in sealing the capillaries and minor shrinkage cracks up to 0.4mm by crystal formation
Non-toxic
Packaging
Part A: 10 kg / pail
Part B: 25 kg / bag