In the corporate and industrial sectors of Kuala Lumpur and Selangor, buildings rarely operate at 100 percent occupancy throughout the day. Traditional HVAC systems that run at a constant speed regardless of the number of people inside are a primary source of energy waste. EKG (Malaysia) SDN BHD specializes in engineering Demand-Controlled Ventilation (DCV) Air Handling Units. These systems use real-time data to adjust airflow, ensuring you only pay for the cooling and filtration you actually need.
DCV is a cornerstone technology for meeting the mandatory Building Energy Intensity (BEI) targets of the EECA 2024 and achieving Green Building Index (GBI) certification.
The goal of a DCV system is to match the ventilation rate to the actual occupant load of the space.
1. Real-Time Occupancy Sensing
CO2 Monitoring: The most common method involves placing Carbon Dioxide (CO2) sensors in the return air duct or within the occupied zones. As more people enter a boardroom or office, CO2 levels rise. The AHU controller uses this data as a proxy for occupancy.
VOC and Humidity Sensing: For industrial facilities or laboratories, we also integrate Volatile Organic Compound (VOC) and humidity sensors to ensure air quality remains within MS 1525 safety limits while minimizing energy use.
2. Dynamic Speed Modulation (VFD Integration)
Variable Frequency Drives: When sensors indicate low occupancy, the AHU's Variable Frequency Drive (VFD) slows down the fan motor.
The Energy Law (Affinity Laws): Reducing fan speed has a disproportionate effect on power savings. Because of the way fan physics works, reducing speed by just 20 percent can cut your motor's power consumption by nearly 50 percent.
EKG (Malaysia) SDN BHD ensures that DCV technology translates into measurable bottom-line performance:
TNB Cost Mitigation:
By avoiding the "over-ventilation" of empty spaces, DCV-equipped AHUs drastically lower monthly electricity bills. This is essential for large-scale developments in KL looking to reduce operational overhead.
Extended Equipment Lifespan:
A DCV AHU does not run at full speed for 12 to 14 hours a day. By modulating the motor and fan based on demand, we reduce mechanical wear and tear, extending the time between major maintenance cycles.
EECA 2024 Star Ratings:
The Energy Commission’s mandatory star ratings prioritize buildings with active energy management. DCV is a primary "Energy Conservation Measure" (ECM) used to move a building from a 1-star risk category into a compliant 3-star or 4-star bracket.
| Feature | Standard AHU (Constant Volume) | EKG DCV-Integrated AHU |
| Airflow Strategy | Always 100 percent | Variable (Matched to Load) |
| Primary Sensors | Temperature Only | CO2 / VOC / Occupancy |
| Fan Control | On / Off | Variable Frequency Drive (VFD) |
| Energy Waste | High (Cools Empty Rooms) | Low (Dynamic Saving) |
| SFP Compliance | Often Exceeded | Optimized for MS 1525 |
| Regulatory Status | High Audit Risk | EECA 2024 & GBI Optimized |
Technical Integrity: We don't just "install sensors." We perform a full AHU Energy Audit to calibrate the DCV logic, ensuring the system maintains perfect comfort levels without "hunting" or frequent motor starts.
3D BIM Coordination: DCV systems involve localized sensors and control wiring. We use 3D modeling to ensure a "clash-free" installation, mapping out the automation components alongside the mechanical ducting.
BOMBA-Compliant Safety: All materials, from the unit casing to the sensor enclosures, are vetted for fire safety (Class 0 or B1) to meet international standards.
Is your HVAC system cooling empty space and wasting your budget? Contact EKG (Malaysia) SDN BHD today for a technical DCV audit and a proposal to transform your AHU into an intelligent, energy-saving asset.
More detail about EKG M & E SDN BHD
Malaysia
