TLP719: Top Choice in United States (USA) Utsource Holding Company Limited

Description

BUY TLP719 https://www.utsource.net/itm/p/1553653.html
Optocoupler - IC Output, 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 11-5J1, SDIP-6

Parameter	Symbol	Min	Typical	Max	Unit	Conditions/Notes
Forward Voltage	V_F	-	1.2	-	V	IF = 20 mA
Peak Forward Current	I_F(P)	-	-	50	mA	t < 1 ms
Continuous Forward Current	I_F	-	-	20	mA	ta = 25°C
Reverse Voltage	V_R	-	-	5	V	IF = 0 mA
Output High Voltage	V_OH	3.8	-	5.0	V	IO = -4 mA, VCC = 5 V
Output Low Voltage	V_OL	-	0.4	0.8	V	IO = 16 mA, VCC = 5 V
Propagation Delay Time	t_PLH	10	20	30	ns	IF = 20 mA, VCC = 5 V, RL = 500 Ω
Propagation Delay Time	t_PHL	10	20	30	ns	IF = 20 mA, VCC = 5 V, RL = 500 Ω
Storage Temperature	T_STG	-55	-	125	°C
Operating Temperature	T_A	-40	-	85	°C

Forward Current (I_F):
- Ensure the forward current does not exceed 20 mA continuously to avoid damage.
- For short pulses, the peak forward current can be up to 50 mA for durations less than 1 ms.
Reverse Voltage (V_R):
- The device should not be subjected to reverse voltages greater than 5 V to prevent breakdown.
Output Voltage Levels:
- When the output is high, the voltage should be between 3.8 V and 5.0 V with a load current of -4 mA.
- When the output is low, the voltage should be between 0.4 V and 0.8 V with a load current of 16 mA.
Propagation Delay:
- The propagation delay times (t_PLH and t_PHL) should be considered when designing circuits to ensure proper timing.
Temperature Considerations:
- The storage temperature range is from -55°C to 125°C.
- The operating temperature range is from -40°C to 85°C.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal components.
- Follow proper soldering techniques to avoid thermal stress during assembly.
Mounting:
- Ensure the device is mounted on a suitable PCB with adequate heat dissipation if necessary.
- Use appropriate mechanical supports to prevent physical stress on the leads.

By adhering to these parameters and instructions, you can ensure reliable operation of the TLP719 optocoupler in your application.

(For reference only)