Description
BUY QM6015D https://www.utsource.net/itm/p/6343879.html
| Parameter |
Description |
Value |
Unit |
| Supply Voltage |
Operating voltage range |
1.7 to 3.6 |
V |
| Supply Current |
Active mode supply current |
2.5 |
μA |
| Output Type |
Logic output type |
CMOS |
|
| Interface |
Communication interface |
I2C |
|
| Measurement |
Magnetic field measurement range |
±8 Gauss |
Gauss |
| Resolution |
Magnetic field resolution |
0.01 |
Gauss |
| Temperature |
Operating temperature range |
-40 to +85 |
°C |
| Package |
Chip package type |
LGA-16 |
|
Instructions for QM6015D:
Power Supply Connection:
- Connect the VDD pin to a power supply within the operating voltage range (1.7V to 3.6V).
- Connect the GND pin to the ground.
I2C Communication Setup:
- Ensure SDA and SCL lines are connected to the corresponding I2C bus lines.
- Pull-up resistors on both SDA and SCL lines are recommended for proper communication.
Initialization:
- After powering up, send an initialization command via I2C to set the device into the desired operational mode.
Data Reading:
- Use I2C commands to read magnetic field data from the sensor registers.
- The data is provided in Gauss units with a resolution of 0.01 Gauss.
Temperature Considerations:
- Operate the device within the specified temperature range (-40°C to +85°C) to ensure accurate measurements.
Handling Precautions:
- Handle the component carefully to avoid damage to the sensitive electronics.
- Follow anti-static precautions to prevent ESD damage.
Storage:
- Store in a dry place away from direct sunlight and extreme temperatures when not in use.
(For reference only)
More detail about Utsource Holding Company Limited
