74 series Digital Integrated Circuits
HD74HC175P
HD74HC175P

 

HD74HC175P

Utsource Holding Company Limited flag
Category: 74 series Digital Integrated Circuits Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY HD74HC175P https://www.utsource.net/itm/p/1706837.html
FLIP-FLOP|QUAD|D TYPE|HC-CMOS|DIP|16PIN|PLASTIC

Parameter Symbol Conditions Min Typical Max Unit
Supply Voltage VCC - 2.0 - 6.0 V
Input Voltage (High Level) VIH VCC = 4.5V to 5.5V 3.15 - 5.5 V
Input Voltage (Low Level) VIL VCC = 4.5V to 5.5V 0 - 2.35 V
Output Voltage (High Level) VOH IO = -0.4mA, VCC = 4.5V to 5.5V 4.5 - VCC - 0.5 V
Output Voltage (Low Level) VOL IO = 4.0mA, VCC = 4.5V to 5.5V 0 - 0.9 V
Input Current (High Level) IIH VI = VCC -20 - - μA
Input Current (Low Level) IIL VI = 0V -1 - - μA
Output Current (High Level) IOH VO = VCC - 1.5V -4.0 - - mA
Output Current (Low Level) IOL VO = 0.4V - - 8.0 mA
Propagation Delay Time tpd VCC = 4.5V to 5.5V, TA = 25°C 0 - 18 ns
Power Dissipation PD - - - 100 mW
Operating Temperature Range TA - -40 - 85 °C
Storage Temperature Range TSTG - -65 - 150 °C

Instructions for Use:

  1. Supply Voltage (VCC):

    • Ensure the supply voltage is within the range of 2.0V to 6.0V.
    • Avoid exceeding the maximum supply voltage to prevent damage to the device.

  2. Input Voltages:

    • For a high-level input (VIH), the voltage should be at least 3.15V when VCC is between 4.5V and 5.5V.
    • For a low-level input (VIL), the voltage should not exceed 2.35V when VCC is between 4.5V and 5.5V.

  3. Output Voltages:

    • The output voltage (VOH) when high should be at least 4.5V or up to VCC - 0.5V.
    • The output voltage (VOL) when low should not exceed 0.9V.

  4. Current Ratings:

    • Ensure that the input currents (IIH and IIL) and output currents (IOH and IOL) do not exceed the specified limits to avoid damage.

  5. Propagation Delay:

    • The propagation delay time (tpd) should be considered in timing-sensitive applications. It can vary based on supply voltage and temperature.

  6. Power Dissipation:

    • The maximum power dissipation (PD) is 100mW. Ensure proper heat dissipation if operating near this limit.

  7. Temperature Ranges:

    • The operating temperature range (TA) is from -40°C to 85°C.
    • The storage temperature range (TSTG) is from -65°C to 150°C.

  8. Handling:

    • Handle the device with care to avoid static discharge, which can damage sensitive components.
    • Follow proper soldering techniques to ensure reliable connections and avoid thermal shock.

By adhering to these parameters and instructions, you can ensure the reliable operation and longevity of the HD74HC175P.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag