Description
EMKARATE RL Oil (MADE IN USA)
Note
This is none dangerous goods (DG) therefore no class label
Refrigeration Oil Cross Reference
http://www.nucalgon.com/refrigeration-oil-cross-reference
Type
5L
EMKARATE Oil RL-32H (5L) (4-CAN/BOX) = RM450.00 PER CAN (11-1-2025=AAA16.667)(5-1-2023=AA20.00001)
EMKARATE Oil RL-32-3MAF (5L) (4-CAN/BOX)
EMKARATE Oil RL-46H (5L) (4-CAN/BOX) * For CENTURY COMPRESSOR (KOREA) SYSTEM WITH GLYCOL!
EMKARATE Oil RL-68H (5L) (4-CAN/BOX) = RM565.00 PER CAN (29-5-2024=AA15.1119)
Equivalent To: Danfoss Oil POE 320SZ
EMKARATE Oil RL-100H (5L) (4-CAN/BOX)
EMKARATE Oil RL-170H (5L) (4-CAN/BOX)
EMKARATE Oil RL-220H Plus (5L) (4-CAN/BOX)
20L
EMKARATE Oil RL-68H (20L)
EMKARATE Oil RL-32H (20L)
EMKARATE Oil RL-46H (20L)
EMKARATE Oil RL-170H (20L)
200L
EMKARATE Oil RL-68H (200L)
1L
EMKARATE RL32-3MAF X 1 LITRE POLYOL ESTER REFRIGERATION OIL (12-CAN/BOX)
* Based on paper (spec), both are similar between RL32-3MAF & RL32H!
Note
specially blend for Copeland compressor
Application
RL-32H
DANFOSS PERFORMER COMPRESSOR SZ161T4VC (SCROLL) (R407C/R134A/R404A/507-POE OIL) * P.O.E 160SZ
COPELAND R410A GAS COMPRESOR (ZP292KCE-TFD-550)
RL-68H
DANFOSS PERFORMER COMPRESSOR SY300A4CBC (SCROLL) (R22/R407C-POE OIL) BRAZING - 25HP/3PH (380-400V) (YORK:YCUA-250)(OIL:RL-68H) * P.O.E. 320SZ
Typical Properties Data Sheet
EMKARATE Oil RL-32H
Description
Emkarate® RL32H is an ISO VG 32 synthetic polyol ester (POE) lubricant formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency and is suitable for both initial fill and service fill. The combination of low temperature characteristics and unparalleled chemical and thermal stability enable the use of Emkarate® RL32H over a wide operating temperature range.
|
Analysis |
Method |
Typical Value |
|
Viscosity @ 40 °C (cSt) |
ASTM D445 |
32.5 |
|
Viscosity @ 100 °C (cSt) |
ASTM D445 |
5.8 |
|
Viscosity Index |
ASTM D2270 |
121 |
|
Pour Point (°C) |
ASTM D97 |
-55 |
|
Density @ 20°C (g/ml) |
ASTM D1298 |
0.98 |
|
Flash Point COC (°C) |
ASTM D92 |
264 |
|
Acid Value (mg KOH/g) |
ASTM D974 |
0.02 |
|
Colour (Hazen units) |
ISO2211 |
60 |
|
Water (ppm) |
ASTM D6304 |
30 |
|
Specific Gravity @ 15.6°C |
ASTM D4052 |
0.889 |
|
Miscibility (Low °C) 10% Lube in R134a |
In House |
-43 |
|
Miscibility (High °C) 10% Lube in R134a |
In House |
>80 |
|
Hydroxyl Value (mg. KOH/g) |
ASTM E326 |
4 |
EMKARATE Oil RL-32-3MAF
Description
Emkarate® RL 32-3MAF is an ISO VG 32 synthetic polyol ester (POE) lubricant formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency and is suitable for both initial fill and service fill. The combination of low temperature characteristics and unparalleled chemical and thermal stability enable the use of Emkarate® RL 32-3MAF over a wide operating temperature range.
|
Analysis |
Method |
Typical Value |
|
Viscosity @ 40°C (cSt) |
ASTM D445 |
31.2 |
|
Viscosity @ 100°C (cSt) |
ASTM D445 |
5.6 |
|
Viscosity Index |
ASTM D2270 |
125 |
|
Pour Point (°C) |
ASTM D97 |
-40 |
|
Density @ 20°C (g/ml) |
ASTM D1298 |
0.981 |
|
Flash Point COC (°C) |
ASTM D92 |
240 |
|
Acid Value (mg KOH/g) |
ASTM D974 |
<0.05 |
EMKARATE Oil RL-46H
Description
Emkarate® RL46H is an ISO VG 46 synthetic polyol ester (POE) lubricant formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency and is suitable for both initial fill and service fill. The combination of low temperature characteristics and unparalleled chemical and thermal stability enable the use of Emkarate® RL46H over a wide operating temperature range.
|
Analysis |
Method |
Typical Value |
|
Viscosity @ 40°C (cSt) |
ASTM D445 |
46.8 |
|
Viscosity @ 100°C (cSt) |
ASTM D445 |
7.3 |
|
Viscosity Index |
ASTM D2270 |
118 |
|
Pour Point (°C) |
ASTM D97 |
-48 |
|
Density @ 20°C (g/ml) |
ASTM D1298 |
0.978 |
|
Flash Point COC (°C) |
ASTM D92 |
260 |
|
Acid Value (mg KOH/g) |
ASTM D974 |
0.03 |
|
Colour (Hazen units) |
ISO2211 |
70 |
|
Water (ppm) |
ASTM D6304 |
40 |
|
Miscibility (Low °C) 10% Lube in R134a |
In House |
-34 |
|
Miscibility (High °C) 10% Lube in R134a |
In House |
>80 |
|
Hydroxyl Value (mg. KOH/g) |
ASTM E326 |
4 |
EMKARATE Oil RL-68H
Description
Emkarate® RL68H is an ISO VG 68 synthetic polyol ester (POE) lubricant formulated specifi cally for use in
refrigeration and air-conditioning compressors using HFC refrigerants. This product provides effective wear
protection for steel and aluminium surfaces for increased system life and improved effi ciency and is suitable for
both initial fi ll and service fi ll. The combination of low temperature characteristics and unparalleled chemical and
thermal stability enable the use of Emkarate® RL68H over a wide operating temperature range.
|
Analysis |
Method |
Typical Value |
|
Viscosity @ 40°C (cSt) |
ASTM D445 |
68.3 |
|
Viscosity @ 100°C (cSt) |
ASTM D445 |
9.5 |
|
Viscosity Index |
ASTM D2270 |
122 |
|
Pour Point (°C) |
ASTM D97 |
-39 |
|
Density @ 20°C (g/ml) |
ASTM D1298 |
0.977 |
|
Flash Point COC (°C) |
ASTM D92 |
270 |
|
Acid Value (mg KOH/g) |
ASTM D974 |
0.02 |
|
Colour (Hazen units) |
ISO2211 |
80 |
|
|
|
|
|
Water (ppm) |
ASTM D6304 |
25 |
|
Miscibility (Low °C) 10% Lube in R134a |
In House |
-26 |
|
Miscibility (High °C) 10% Lube in R134a |
In House |
>80 |
|
Hydroxyl Value (mg. KOH/g) |
ASTM E326 |
4 |
EMAKARATE Oil RL-100H
Description
Emkarate® RL100H is an ISO VG 100 synthetic polyol ester (POE) lubricant formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency and is suitable for both initial fill and service fill. The combination of low temperature characteristics and unparalleled chemical and thermal stability enable the use of Emkarate® RL100H over a wide operating temperature range.
|
Analysis |
Method |
Typical Value |
|
Viscosity @ 40°C (cSt) |
ASTM D445 |
98.5 |
|
Viscosity @ 100°C (cSt) |
ASTM D445 |
11.4 |
|
Viscosity Index |
ASTM D2270 |
103 |
|
Density @ 20°C (g/ml) |
ASTM D1298 |
0.969 |
|
Pour Point (°C) |
ASTM D97 |
-31 |
|
Flash Point COC (°C) |
ASTM D92 |
265 |
|
Acid Value (mg KOH/g) |
ASTM D974 |
0.02 |
|
Colour (Hazen units) |
ISO2211 |
80 |
|
Water (ppm) |
ASTM D6304 |
30 |
|
Miscibility (Low °C) 10% Lube in R134a |
In House |
-28 |
|
Miscibility (High °C) 10% Lube in R134a |
In House |
>80 |
|
Hydroxyl Value (mg. KOH/g) |
ASTM E326 |
4 |
EMAKARATE Oil RL-170H
Description
Emkarate® RL170H is a cSt 170 synthetic polyol ester (POE) lubricant formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency and is suitable for both initial fill and service fill. The combination of low temperature characteristics and unparalleled chemical and thermal stability enable the use of Emkarate® RL170H over a wide operating temperature range.
|
Analysis |
Method |
Typical Value |
|
Viscosity @ 40°C (cSt) |
ASTM D445 |
170 |
|
Viscosity @ 100°C (cSt) |
ASTM D445 |
17 |
|
Viscosity Index |
ASTM D2270 |
107 |
|
Pour Point (°C) |
ASTM D97 |
-25 |
|
Density @ 20°C (g/ml) |
ASTM D1298 |
0.968 |
|
Flash Point COC (°C) |
ASTM D92 |
290 |
|
Acid Value (mg KOH/g) |
ASTM D974 |
0.02 |
|
Colour (Hazen units) |
ISO2211 |
150 |
|
Miscibility (Low °C) 10% Lube in R134a |
In House |
Immiscible at RT |
|
Miscibility (High °C) 10% Lube in R134a |
In House |
Immiscible |
|
Water (ppm) |
ASTM D6304 |
25 |
EMAKARATE Oil RL-220H Plus
Description
Emkarate® RL 220H Plus is an ISO VG 220 synthetic polyol ester (POE) lubricant formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency and is suitable for both initial fill and service fill. The combination of low temperature characteristics and unparalleled chemical and thermal stability enable the use of Emkarate® RL 220H Plus over a wide operating temperature range.
|
Analysis |
Method |
Typical Value |
|
Viscosity @ 40°C (cSt) |
ASTM D445 |
220 |
|
Viscosity @ 100°C (cSt) |
ASTM D445 |
19 |
|
Viscosity Index |
ASTM D2270 |
97 |
|
Pour Point (°C) |
ASTM D97 |
-30 |
|
Density @ 20°C (g/ml) |
ASTM D1298 |
0.98 |
|
Flash Point COC (°C) |
ASTM D92 |
300 |
|
Acid Value (mg KOH/g) |
ASTM D974 |
<0.05 |
More detail about Culmi Air-Cond & Refrigeration Parts Supply Sdn Bhd
