This combo package consists of:
1. Fieldpiece MR45INT - Digital Recovery Machine x 1unit
2. Fieldpiece HV1S Vacuum Hose 1/4'' 3/8'' (1.5M) x 2pcs
3. Fieldpiece VCG1E Valve Core Remover x 2pcs
4. Charging Hose 6'' (1/4'' x 1/4'') x 1pc
5. Adaptor 1/4'' x 3/8'' x 2pcs
The Recovery Revolution
Smart, variable speed one horsepower motor
Starts and runs easily with lower voltageMinimizes liquid slugging and maximizes vapor recoveryEasy access portsWater resistant to withstand direct rainWelcome to the Recovery Revolution
The Fieldpiece MR45 recovery machine has onboard system monitoring that adjusts motor performance to handle liquid and run twice as fast on vapor. MR45 also steps up low voltage at the power plug to deliver full power to the motor where high voltage drop is a problem. With a powerful 1HP motor and super-sized condenser, this machine excels on longer and hotter jobs. The easy-to-read display, lightweight (22lbs), straight hose connection ports, and single dial make this machine user-friendly while being tough enough for everyday use, even in the rain.Protects from voltage drop (runs as low as 95 VAC)Single dial self purgeTwice the RPMs (3,000) and twice the horsepower (1HP) with DC MotorExtra large condenser cools faster, especially on hot daysOnly 22 lbsWater resistance to withstand direct rainEasy access portsLong life and low friction with ceramic cylindersDual cylinder compressorEasy hose connections and built in power cord storageLarge backlit display with status messages
REFCO HCL6-60-Y-N-3/8X1/4 RAPID RECOVERY HOSE (5FT)
Item Number 4687411High volume flow rate due to larger diameterWithout core depressorReplaceable neoprene (CR) sealHigh-quality material for maximum durability, against hardening and embrittlementSerrated union nuts for better grip when tightening by hand32525 Valve Core Replacing Tool - 1/4“ SAE system connectionChange valve core under pressureFaster evacuation and chargingDeep vacuum measuring at systemNo refrigerant lossWith blank off valveWith adjustable vacuum gauge access port ¼“ SAEPart No 4687701
High-Speed Y Fitting for Fast Recovery or Evacuation
The MegaFlow 1/4in Speed-Y features a large inner diameter for unrestricted Full Flow, is Vacuum-Rated to 20 microns and rated for high pressure refrigerants, such as R410a. The Speed-Y makes it easy to connect multiple hoses to a single point without the drawbacks of a traditional manifold.
Features and Benefits
Full Flow - Large inner diameter with no restrictions for increased conductance speedVacuum-Rated to 20 micronsDesigned for High Pressure - Designed for high pressure refrigerants, such as R410ASimplified Connections - Easily connect multiple hoses to a single point and reduce leak pointsDurable - Premium aircraft grade aluminum bodies with high quality brass fittingsIncrease the speed of any recovery pump or vacuum pump with 1/4in connections
Why Use a Speed-Y Instead of a Manifold?
Traditional manifolds suffer from a few shortcomings; highly restrictive, not designed for deep vacuum and a lot of potential leak points. The Speed-Y solves all of these issues in a small tidy package. Simplify your job, increase conductance speed and decrease recovery/evacuation times with the MegaFlow 1/4in Speed-Y.
Working on Large Multi-Port Systems?
With the MegaFlow 1/4in Speed-Y, vacuum pumps with only a few ports are no longer limited. Easily connect multiple hoses to a single port. The Greater the Flow... The Faster it will Go!
Are your Tools Rated for Vacuum and Pressure?
The MegaFlow 1/4in Speed-Y is Vacuum-Rated to 20 microns and designed for high pressure refrigerants, such as R410A. This combination will give you the peace of mind that your tools aren't going to leak in a deep vacuum or during critical parts of the recovery process.
Malaysia
