BS5-F1M-P: Top Choice in Malaysia, Kedah You Chin Electrical Sdn Bhd

Specifications

Sensing Type: Through-beam type
Sensing Distance: 5mm
Sensing Target: Opaque
Min. Sensing Target: ≥0.8mm×2mm
Hysteresis (Distance): ≤0.05mm
Response Time: Light ON: Max. 20, Dark ON: Max. 100
Response frequency: 2kHz
Light Source: Infrared LED
Peak Emission Wavelength: 940nm
Operation Mode: Light ON/Dark ON (set by control wire)
Indicator: Operation indicator (red LED)
Weight: Approx. 50g
Power Supply: 5-24VDC ±10%(ripple P-P : max. 10%)
Current Consumption: Max. 30mA
Control Output: PNP open collector
Load Voltage: ≤30VDC
Load Current: Max. 100mA
Residual voltage: NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection Circuit: Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Insulation Resistance: ≥20 MΩ (250 VDC megger)
Noise Immunity: The square wave noise (pulse width: 1) by the noise simulator ±240VDC
Dielectric Strength: 1,000VAC 50/60Hz for 1 minute
Vibration: 1.5mm amplitude (max. acceleration 196m/s) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
Shock: 15,000 m/s (approx. 1,500G) in each X, Y, Z direction for 3 times
Environment_Ambient Illumination: Fluorescent lamp: Max. 1,000lx(received illumination)
Environment_Ambient Temperature: -20 to 55℃, storage : -25 to 85℃
Environment_Ambient Humidity: 35 to 85% RH, storage: 35 to 85% RH
Protection Structure: IP50 (IEC standard)
Connection: Cable type
Connection Type: 3 mm, 4-wire, 1m
Core: AWG28 (0.08mm)
Material: Case: PBT, Sensing part: PC

Description

Approval :

More detail about You Chin Electrical Sdn Bhd