FC400-CCL is a weighing indicator equipped as standard with CC-Link interface. It is ideal for a variety of weighing applications like hopper scales, bagging machines, and level meters.
Network with multiple units can be configured easily.
DIN-rail mountable
Dimensions: 34(W)×88(H)×91(D)mm (Projections excluded)
Weight: Approx. 210g
Equipped with CC-link, RS-485, and USB interface!
High-Speed A/D conversion and powerful digital processing capability of 1200 times/sec..
High display resolution of 1/100000 (max).
Measurement can be performed quickly and precisely due to high speed A/D conversion.
■ High performance filter
As it is resistant to vibration, measurement can be performed quickly and precisely.
■ Equivalent input calibration
Theoretical calibration can be performed easily by registering the capacity and rated output of load cells.
■ Multipoint calibration (linearization)
Three additional points can be defined in the middle between zero and span for better linearity.
■ Basic weighing process control function
Sequential control can be performed without connecting external PLC etc.
Analog｜Display｜External signal｜Interface｜General specification｜Attachment
| Analog | |
| Excitation voltage | DC5V±5% Output current: 90mA Ratiometric method (Up to 6 350Ω load cells can be connected in parallel） |
|---|---|
| Signal input range | －2.5 to 5.1mV/V |
| Zero adjustment range | Automatic adjustment by digital processing -0.5 to 2.0mV/V |
| Span adjustment range |
Automatic adjustment by digital processing 0.02 to 3.0mV/V |
| Gain correction | Up to three point multi-point calibration is possible using linearization function |
| Min. input sensitivity | 0.15μV/count |
| Accuracy | Non-linearity: within 0.01%FS Zero drift: 0.0002%FS/℃ Typ Gain drift: 1ppm/℃ Typ |
| Filter | Digital low-pass filter: 0.1 to 300 Hz Moving average filter: OFF, 2 to 512 times |
| A/D converter | Speed: 1200 times/sec. Resolution: 24bit binary |
| Display | |
| Display unit | Character height 8mm, Numerical display by 7-segment green LED |
|---|---|
| Display value | Up to 6 digits |
| Display frequency | Selectable from 3, 6, 13, 25 times/sec. |
| Status display | RUN, SD, RD, ERR |
| External signal | |
| Output signal (5 points) |
Selectable/configurable Transistor’s open collector output Vceo=30V, Ic=50mA |
|---|---|
| Input signal (3 points) |
Selectable/configurable Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.). * DC24V external power supply is required. |
| Interface | |
| USB | USB interface |
|---|---|
| 485 | RS-485 interface (Selectable from Modbus-RTU or UNI-Format) |
| CCL | CC-Link interface |
| General specification | |
| Power supply voltage | DC24V (±15%) |
|---|---|
| Power consumption | 3W typ |
| Operating conditions | Temperature: Operating temperature range: -10℃ to ＋50℃, torage temperature range: －20℃ to ＋85℃ Humidity: 85%RH or less (non-condensing) |
| Dimensions | 34(W)×88(H)×91(D) mm (Projections excluded) |
| Weight | Approx. 210g |
| Attachment | |
| Jumper cable | 2 |
|---|---|
| Mini driver | 1 |
| CC-Link connector | 1 |
| Various I/O connector | 2 |
| Quick manual | 2 |
Malaysia
