Ready Stock!
Weberdry WP 100-SF is a semi-flexible, two component polymer modified cementitious waterproofing slurry comprising a latex admixture and a cement base powder incorporating special additives. It protects a wide range of building and structural concrete components with excellent resistance to water.
USES :
• Bathroom, kitchens, under tiled floors and dry yard.
• Refuse Chamber.
• Water Tanks.
• Balconies and A/C Ledge.
• RC Gutters and planter boxes (but not anti-root product).
• Swimming pools
FEATURES AND BENEFITS :
• Pre-packed components, easy to mix and apply.
• Slurry consistency.
• Good adhesion to sound substrates.
• Protects against water penetration and concrete carbonation.
• Non-toxic and non-corrosive.
• Easily applied using brush or roller
PREPARATION :
• Concrete, cement-sand render / screed & masonry surfaces must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and remove any excess water to avoid ponding on horizontal areas. This is particularly important if the substrate exhibits a high degree of water absorption. Rapid loss of moisture from the waterproof coating may result in pinholes, poor adhesion and overall weakened properties.
MIXING :
• Mix in a clean container by slowly adding Part A (powder) to Part B (liquid) and stirring with a low speed mixer (500 rpm) for 3 – 5 minutes, until a smooth consistent mixture and a slurry consistency is achieved.
COVERAGE :
Approximately 2.0kg/m² in 2 coats.
