E.MIX Easi Screed

Ready Stock!

E.MIX Easi Screed is specially blended premixed hydraulic cement and non-reactive aggregate. The product is ready-to-use when mixed with clean water. it is easy-to-apply and useful for levelling rough and uneven concrete floors. The product is shrinkage compensated and can be troweled for screed repairing.

USAGE :
- Industrial buildings
- Residential buildings
- Commercial buildings
- Exterior screeding
- Screed repairing

FEATURES AND BENEFITS :
- High compressive srength.
- Shrinkage compensated: reduce the chance of shrinkage cracks and debonding.
- Single component: fixed mixing proportion, ensure the quality of work
- Convenient: specially formulated premixed to replace conventional cement sand screed.
- Suitable for tiling with receiving Weber Tile Adhesive and Weber Tile Grout series products.

PREPARATION :

• The concrete substrate should be clean, structurally sound, adequately true and level to achieve specified tolerances, free from contamination, loose particles, grease, lacquer, plastics or traces of foreign materials, and protrusions such as wood peels, nails, excess mortar or any joints with tolerance that cannot be covered by the thickness of screed.
• Weak or soft substrates, such as asphalt, which may be subject to movement under imposed load (either in use or during material curing), must be removed.
• Concrete contaminated by oil or grease may require flame gunning and/or treatment with a proprietary degreaser. Seal up all drainage outlet.
• Contraction joints, construction joints and cracks in the substrate which may be subject to movement after installation of E.MIX Easi Screed must be maintained as joints in the new surface.
• Surface preparation, Bond Coat Slurry with a ratio of 5 : 3 : 2 (Ordinary Portland Cement : Water : mix multibond) should be brush on to the substrate, apply E.MIX Easi Screed while Bond Coat Slurry is still wet and sticky.