UNI-T UT622 Series

UNI-T UT622 Series

Kategori: LCR Multimeter Tersedia
Untuk maklumat lanjut, lawati laman web rasmi kami di mtmpre.com.my

Penerangan

The UT622 Series Handheld LCR meters feature powerful functions, high accuracy, fast speed, and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, large-capacity rechargeable batiery, and up to 100kHz test frequency, the meters can be used for longstanding accurate and convenient measurement in any occasion. They are suitable for the measurement and screening of inductance, capacitance, and resistance in laboratories, production lines, maintenance points etc.
100kHz
MAX. TEST FREQUENCY
0.1%
ACCURACY
5-bit
DISPLAY COUNT
20rdgs/s
MAX. TEST RATE
-
DCR
Mini-USB
CONNECTIVITY
2.8'' TFT LCD
DISPLAY



3-terminal and 5-terminal test ports
Support three-terminal test, five-terminal end-face test and Kelvin test line expansion. Allow both convenient testing and high-precision testing requirements. 
3-terminal and 5-terminal test ports
Recording mode
The recording mode can be used for data statistics to dynamically obtain the Average, Maximum, Minimum and Number of records 
Recording mode
Tolerance mode
The tolerance mode can be used for component sorting. The nominal value, tolerance limit, alarm, LED indicator and counter can be set, and the percentage deviation between the measured value of the main parameter and the nominal value can be calculated for qualified and unqualified Compare, display GO/NG discrimination results. Tolerance range: 1%~20% Test speed: 20 times/s(Fast),5 times(Med),2 times/s (Slow) 
Tolerance mode
Function panel introduction
1. Power switch: long press to turn on, short press to turn off 2. Arrow keys: select menu operation keys 3. Trigger key: trigger/select trigger mode 4. D/Q/θ/ESR: secondary parameter selection 5. FREQ/REC: Frequency 100Hz, 120Hz, 1kHz, 10kHz, 100kHz selection and record mode button. 6. LEVEL/TOL: 0.1V, 0.3V, 1V, switch and tolerance mode buttons 7. L/C/R/Z/AUTO: main parameters and automatic identification. 8. SPEED/P-S: Test speed and equivalent mode switch button 9. CLEAR/UTIL: CLEAR clear and UTIL practical configuration menu. 
Function panel introduction
Power supply
UT622 series have two power supply methods: lithium polymer battery power supply and USB power adapter power supply. 
Power supply
 

Lebih maklumat tentang MTM Precision Sdn Bhd
MTM Precision Sdn Bhd
MTM Precision Sdn Bhd Surveying Instruments Selangor, GPS Systems Supply Kuala Lumpur (KL), Total Stations Supplier Malaysia ~ MTM Precision Sdn Bhd