74HCT32D

BUY 74HCT32D https://www.utsource.net/itm/p/746974.html
8-Bit Parallel-Out Serial Shift Registers 14-TSSOP -40 to 85

Instructions for Use

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0V to 6.0V. Operating outside this range can damage the device.

2. Input Levels:

   • For a valid low input, the voltage should be less than or equal to 0.8V.
   • For a valid high input, the voltage should be greater than or equal to 2.0V.

3. Output Levels:

   • The output low voltage (V_OL) will typically be around 0.1V but can go up to 0.5V.
   • The output high voltage (V_OH) will be at least 2.4V and can go up to V_CC - 0.5V.

4. Current Ratings:

   • The input leakage current (I_IL) is typically 1.0μA.
   • The output leakage current (I_OL) is typically 0.1μA.

5. Propagation Delay:

   • The typical propagation delay time (t_pd) is 12ns.

6. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure proper heat dissipation if operating near this limit.

7. Temperature Ranges:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_STG) is from -65°C to 150°C.

8. Handling:

   • Handle the device with care to avoid static discharge which can damage the internal circuits.
   • Use appropriate ESD protection measures during handling and assembly.

9. Mounting:

   • Ensure the device is securely mounted on the PCB to prevent mechanical stress.
   • Follow recommended soldering profiles to avoid thermal damage.

10. Testing:

    • Test the device under typical operating conditions to ensure it meets the specified parameters.
    • Use a multimeter to verify input and output voltages and currents.