Binder Type: Modified long-oil alkyd.
Drying Time: Touch dry in 12 minutes; Hard dry in 2 hours (at 28-32°C).
Recoating Interval: Minimum 8 hours.
Theoretical Coverage: 9 – 11 m² per litre per coat.
Volume Solids: Approximately 52%.
Dry Film Thickness: 50 - 60 µm per coat.
Shelf Life: Up to 12 months in a tightly sealed container.
Preparation: Stir the paint thoroughly before use to ensure a homogeneous mixture.
Thinning: For brush or roller, thin with a maximum of 5% Nippon General Purpose Thinner.
Method: Apply 1 coat using a brush, roller, or spray, ensuring even distribution across the substrate.
For Metal: 1 coat Red Oxide Primer + 1 coat Economy Undercoat + 2 coats 9000 Gloss Finish.
For Wood: 1 coat 9000 Aluminium Wood Primer + 1 coat Economy Undercoat + 2 coats 9000 Gloss Finish
Cleaning: Ensure the surface is completely dry and free from dirt, grease, and oil.
Ferrous Metal: Remove mill scales and rust by sanding or wire-brushing to a clean finish.
Wood: Smoothen the surface with suitable sandpaper and wipe off all dust.
Spot Priming: Scraped or bare areas should be spot-primed with the appropriate primer before the full undercoat is applied.
Adhesion: Lightly sand previously painted or smooth surfaces to improve intercoat adhesion.
Malaysia
