-
Supply Voltage (VDD):
- Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
- Connect VDD to a stable power source.
-
Input Voltage (VIN):
- The input voltage should be within the range of 0V to VDD.
- Do not exceed the supply voltage to avoid damage to the device.
-
Output Voltage (VOUT):
- The output voltage will be proportional to the input voltage and will range from 0V to VDD.
- Ensure the load connected to VOUT can handle the output current.
-
Bandwidth:
- The device operates with a frequency response up to 100kHz.
- For applications requiring higher frequencies, consider using a different device or additional filtering.
-
Input Bias Current:
- The maximum input bias current is 1μA.
- Use high-impedance sources to minimize errors due to bias current.
-
Quiescent Current:
- The device consumes approximately 100μA in active mode.
- Ensure the power supply can provide this current without significant voltage drop.
-
Shutdown Current:
- When the device is in shutdown mode, the current consumption drops to approximately 1μA.
- Use the shutdown pin to control power consumption in low-power applications.
-
Differential Input Range:
- The maximum differential input voltage is 1V.
- Exceeding this range can cause distortion or damage.
-
Common-Mode Rejection Ratio (CMRR):
- The device has a CMRR of at least 80dB, which helps in rejecting common-mode noise.
- Use balanced inputs to maximize CMRR performance.
-
Power-Down Time:
- The device enters power-down mode within 1μs after the shutdown signal is applied.
- Ensure the shutdown signal is stable and clean to avoid unintended behavior.
-
Operating Temperature Range:
- The device is designed to operate between -40°C and 85°C.
- Avoid operating outside this range to prevent performance degradation or damage.
-
Storage Temperature Range:
- Store the device between -65°C and 150°C.
- Ensure proper handling and storage conditions to maintain device integrity.
