NJM4565DA

BUY NJM4565DA https://www.utsource.net/itm/p/139541.html
DUAL OPERATIONAL AMPLIFIER

Instructions for Use

1. Supply Voltage (Vcc):

   • The NJM4565DA can operate with a supply voltage ranging from 1.8V to 12V. Ensure that the supply voltage is within this range to avoid damage to the device.

2. Quiescent Current (IQ):

   • The quiescent current at a supply voltage of 5V is typically 0.3mA. This value helps in power consumption calculations.

3. Input Offset Voltage (VIO):

   • The input offset voltage should be within ±2mV when the supply voltage is 5V. This parameter is crucial for precision applications.

4. Input Bias Current (IIB):

   • The input bias current should be within ±10nA at a supply voltage of 5V. This is important for high-impedance circuits.

5. Input Offset Current (IOS):

   • The input offset current should be within ±5nA at a supply voltage of 5V. This parameter affects the accuracy of differential inputs.

6. Slew Rate (SR):

   • The slew rate is typically 0.5V/μs at a supply voltage of 5V and a load resistance of 2kΩ. This parameter is important for high-frequency applications.

7. Large Signal Voltage Gain (AV):

   • The large signal voltage gain is typically 100dB at a supply voltage of 5V and a load resistance of 2kΩ. This indicates the amplification capability of the device.

8. Output Short-Circuit:

   • The device can handle short-circuits for up to 100ms at a supply voltage of 5V. However, prolonged short-circuits can damage the device.

9. Operating Temperature (Toper):

   • The operating temperature range is from -40°C to +85°C. Ensure that the device is used within this temperature range to maintain reliability.

10. Storage Temperature (Tstg):

    • The storage temperature range is from -65°C to +150°C. Store the device in a dry and cool environment to prevent damage.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Ensure proper decoupling capacitors are used to stabilize the power supply and reduce noise.
• For high-frequency applications, pay attention to the layout to minimize parasitic inductances and capacitances.