TLC27L4ACN

BUY TLC27L4ACN https://www.utsource.net/itm/p/403378.html
LinCMOSE PRECISION QUAD OPERATIONAL AMPLIFIERS

Below is the parameter table and instructions for the TLC27L4ACN operational amplifier.

TLC27L4ACN Parameter Table

Instructions for Using TLC27L4ACN

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 6.0V.
   • Connect V_CC to the positive supply and GND to the ground.

2. Input Voltage:

   • The input voltage (V_I) should be within the range of 0V to V_CC - 1.5V.
   • Avoid exceeding these limits to prevent damage to the device.

3. Output Voltage:

   • The output voltage swing (V_O) can range from 0V to V_CC - 1.5V.
   • Ensure that the load connected to the output does not exceed the maximum output current capability of the op-amp.

4. Quiescent Current:

   • The typical quiescent current (I_Q) is 35 μA at V_CC = 5V and TA = 25°C.
   • Consider this when designing power-sensitive applications.

5. Input Bias Current:

   • The typical input bias current (I_B) is 50 nA at V_CC = 5V and TA = 25°C.
   • Use high-value resistors in the feedback path to minimize the effect of input bias current.

6. Input Offset Voltage:

   • The typical input offset voltage (V_OS) is 2.5 mV at V_CC = 5V and TA = 25°C.
   • For precision applications, consider using a zero-adjust pin if available or trim the circuit to minimize offset.

7. Slew Rate:

   • The typical slew rate (SR) is 0.5 V/μs at V_CC = 5V and TA = 25°C.
   • Ensure that the input signal frequency and amplitude do not exceed the slew rate limit to avoid distortion.

8. Gain Bandwidth Product:

   • The typical gain bandwidth product (GBW) is 1.0 MHz at V_CC = 5V and TA = 25°C.
   • Use this value to determine the maximum closed-loop gain and bandwidth for your application.

9. Common Mode Rejection Ratio (CMRR):

   • The typical CMRR is 80 dB at V_CC = 5V and TA = 25°C.
   • This indicates the ability of the op-amp to reject common-mode signals.

10. Power Supply Rejection Ratio (PSRR):

    • The typical PSRR is 80 dB at V_CC = 5V and TA = 25°C.
    • This indicates the ability of the op-amp to reject variations in the power supply voltage.

11. Operating Temperature:

    • The operating temperature range (TA) is typically -40°C to 85°C.
    • Ensure that the ambient temperature remains within this range to maintain reliable operation.

12. Storage Temperature:

    • Store the device in a dry environment with a temperature range of -65°C to 150°C to prevent damage.

13. Handling Precautions:

    • Handle the device with care to avoid static discharge.
    • Use proper ESD protection measures when handling the device.

By following these parameters and instructions, you can ensure optimal performance and reliability of the TLC27L4ACN operational amplifier in your circuits.