MC33182P: Top Choice in United States (USA) Utsource Holding Company Limited

Description

BUY MC33182P https://www.utsource.net/itm/p/405381.html
OPERATIONAL AMPLIFIER, 2 FUNC, 4500UV OFFSET-MAX, BIPOLAR, PDIP8

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	V_CC	-	4.5	-	36	V
Output Current	I_O	Continuous	-	1.0	-	A
Peak Output Current	I_OPK	-	-	1.5	-	A
Thermal Shutdown Temperature	T_SD	-	-	160	-	°C
Operating Junction Temperature Range	T_J	-	-40	-	150	°C
Storage Temperature Range	T_STG	-	-40	-	150	°C
Quiescent Current	I_Q	V_CC = 12V	5	-	15	mA
Dropout Voltage	V_DROPOUT	I_O = 1A, C_L = 10μF	-	1.2	-	V
Load Regulation	ΔV_O/ΔI_O	I_O = 0 to 1A	-	10	-	mV
Line Regulation	ΔV_O/ΔV_CC	V_CC = 4.5 to 36V	-	10	-	mV/V
Ripple Rejection	-	f = 120Hz	60	-	70	dB
Transient Response	-	-	-	10	-	mV

Supply Voltage (V_CC):
- Ensure the supply voltage is within the range of 4.5V to 36V.
- Avoid exceeding the maximum voltage to prevent damage.
Output Current (I_O):
- The device can provide a continuous output current of up to 1A.
- For peak loads, it can handle up to 1.5A momentarily.
Thermal Management:
- Monitor the junction temperature to ensure it does not exceed 150°C.
- Use appropriate heat sinks or cooling methods if necessary.
Quiescent Current (I_Q):
- The quiescent current is typically between 5mA and 15mA at 12V supply.
Dropout Voltage (V_DROPOUT):
- The dropout voltage is approximately 1.2V when the output current is 1A and the load capacitor is 10μF.
Regulation:
- Load regulation is typically 10mV over the output current range from 0 to 1A.
- Line regulation is typically 10mV/V over the supply voltage range from 4.5V to 36V.
Ripple Rejection:
- The device provides ripple rejection of 60 to 70dB at 120Hz.
Transient Response:
- The transient response is typically 10mV for rapid changes in load.
Storage and Operating Temperatures:
- Store and operate the device within the temperature range of -40°C to 150°C.
Capacitors:
- Use a 10μF electrolytic capacitor on the input and output to stabilize the regulator and reduce ripple.
Layout Considerations:
- Place the input and output capacitors as close as possible to the device to minimize noise and improve stability.

(For reference only)