AD736JRZ AD736 SOP8

BUY AD736JRZ AD736 SOP8 https://www.utsource.net/itm/p/9527268.html

Instructions for AD736JRZ AD736 SOP8

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.7V to 5.25V.
   • Connect the positive supply to pin 8 and the ground to pin 4.

2. Input Signal (V_IN):

   • The input signal should be within ±200mV.
   • Connect the input signal to pins 1 and 2 for differential input, or to pin 1 for single-ended input with pin 2 grounded.

3. Output Signal (V_OUT):

   • The output voltage will range from 0V to V_CC.
   • Connect the output to pin 5.

4. Load Resistance (R_L):

   • The load resistance should be at least 10kΩ to ensure proper operation.
   • Connect the load between pin 5 and ground.

5. Common Mode Input Voltage (V_CM):

   • The common mode input voltage should be within the range of 0V to V_CC.

6. Operating Temperature (T_A):

   • The device is designed to operate within the temperature range of -40°C to +85°C.

7. Power Supply Rejection Ratio (PSRR):

   • The device has a typical PSRR of 70dB, which helps in reducing the effect of power supply noise on the output.

8. Common Mode Rejection Ratio (CMRR):

   • The device has a typical CMRR of 70dB, which helps in rejecting common mode signals.

9. Slew Rate:

   • The slew rate is typically 0.3V/μs, which limits the maximum rate of change of the output voltage.

10. Bandwidth:

    • The bandwidth is typically 100kHz, which is the frequency at which the gain drops to -3dB.

11. Pin Configuration:

    • Pin 1: Non-inverting Input
    • Pin 2: Inverting Input
    • Pin 3: NC (No Connection)
    • Pin 4: Ground
    • Pin 5: Output
    • Pin 6: NC (No Connection)
    • Pin 7: NC (No Connection)
    • Pin 8: V_CC

12. Handling Precautions:

    • Handle the device with care to avoid static damage.
    • Ensure all connections are secure and within the specified limits to prevent damage to the device.