SP3485EN SP3485EN-L/TR 8SOIC
SP3485EN SP3485EN-L/TR 8SOIC

 

SP3485EN SP3485EN-L/TR 8SOIC

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY SP3485EN SP3485EN-L/TR 8SOIC https://www.utsource.net/itm/p/9528630.html

Parameter Symbol Conditions Min Typ Max Unit
Operating Supply Voltage VCC 4.75 5.00 5.25 V
Input Current IIN VIN = 5V, No Load - 1.0 2.0 mA
Output Current IOUT VOUT = 5V, Continuous 0 15 20 mA
Common-Mode Input Voltage VCM -7 - 12 V
Differential Input Voltage VDIF -0.3 - 0.3 V
Output High Voltage VOH IOL = -4mA 4.4 - 5.0 V
Output Low Voltage VOL IOL = 16mA 0 - 0.4 V
Propagation Delay tpd VCC = 5V, VIN = 0 to 5V 15 25 35 ns
Skew tskew VCC = 5V, VIN = 0 to 5V - 2 5 ns
Operating Temperature TA Storage -40 - 85 °C
Storage Temperature TSTG -55 - 125 °C

Instructions for SP3485EN SP3485EN-L/TR 8SOIC:

  1. Power Supply:

    • Ensure the supply voltage (VCC) is within the range of 4.75V to 5.25V.
    • Use a stable power source to avoid voltage fluctuations that can affect performance.

  2. Input and Output Connections:

    • Connect the input signals to the appropriate pins, ensuring they do not exceed the common-mode and differential input voltage ranges.
    • The output current should not exceed 20mA continuously to prevent damage to the device.

  3. Signal Integrity:

    • Keep signal traces short and use proper grounding techniques to minimize noise and interference.
    • Use termination resistors if necessary to match the characteristic impedance of the transmission lines.

  4. Temperature Considerations:

    • Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.
    • Store the device in a temperature-controlled environment between -55°C and 125°C.

  5. Handling and Installation:

    • Handle the device with care to avoid static discharge and physical damage.
    • Follow standard surface mount technology (SMT) procedures for installation on PCBs.

  6. Testing and Troubleshooting:

    • Use a multimeter to verify the supply voltage and output voltages.
    • Check for any shorts or open circuits in the connections.
    • If the device does not function as expected, refer to the datasheet for troubleshooting tips and contact the manufacturer for further assistance.

  7. Compliance:

    • Ensure the device complies with all relevant safety and regulatory standards for your application.
    • Consult the datasheet for detailed compliance information and certifications.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag