74LS06DR 3: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	V_CC	-	4.75	-	5.25	V
Output High Voltage	V_OH	I_OH = -0.4 mA	2.7	-	5.0	V
Output Low Voltage	V_OL	I_OL = 8 mA	0.4	-	0.5	V
Input High Voltage	V_IH	-	2.0	-	-	V
Input Low Voltage	V_IL	-	-	-	0.8	V
Propagation Delay Time	t_pd	V_CC = 5V, T_A = 25°C	-	15	25	ns
Power Dissipation	P_D	Per Gate	-	-	100	mW
Operating Temperature	T_A	-	-55	-	125	°C

Power Supply:
- Connect V_CC to +5V and GND to ground.
- Ensure the supply voltage is within the specified range (4.75V to 5.25V) to avoid damage to the device.
Input Connections:
- Connect input signals to the input pins (1, 2, 3).
- Ensure input voltages are within the valid range (0.8V for low, 2.0V for high).
Output Connections:
- Connect load or next stage to the output pins (4, 5, 6).
- The output can drive up to 8 mA when low and sink up to -0.4 mA when high.
Propagation Delay:
- The typical propagation delay is 15 ns at 25°C. Ensure your circuit timing accounts for this delay.
Temperature Considerations:
- The device operates over a wide temperature range (-55°C to 125°C). Ensure the operating environment does not exceed these limits.
Handling Precautions:
- Handle the device with care to avoid static discharge which can damage the internal circuits.
- Use proper grounding and anti-static measures during handling and installation.
Storage:
- Store the device in a dry, cool place to prevent moisture damage.
Testing:
- Before integrating the device into a larger circuit, test it individually to ensure it meets the specified parameters.
Soldering:
- Use a soldering iron with a temperature of 300°C to 350°C and complete the soldering process within 5 seconds to avoid thermal stress.
Compliance:
- Ensure that the device complies with all relevant safety and regulatory standards for your application.

(For reference only)